Search:

I'm not looking at my control, or books right now; but, can you set your G54 for the C axis? You might need to set C0 when the stock is square to the turret so you can dictate the position of the...

New dog pins and springs installed today, with ample grease. Turrets index as they should. Big thanks to Doosan for stocking the parts, not overcharging me for said parts, and providing me with...

I have an issue with my turrets not "pinning" once they index. My mechanic has found that the dog pin is not returning to it's closed position after the turret indexes. The problem was intermittent...

Thanks for looking in...

I'm having an issue with the G300 torque control command on my TT1800SY.

I'm trying to use a live center mounted in the lower turret to hold steady a .500 round SS rod...

That is a starting point. A machinist who can run the shop at close to its full potential will make considerably more once a pattern is established. Are you interested or know someone who may be?

We are seeking an experienced, highly skilled machinist with the ability to program G-Code Fanuc, setup CNC lathes/mills as well as manual machines in our job shop in Northwest Houston. Candidate...

Ended up using G92 for this one; worked just fine.

Thanks for the input.

dcouper,
I like your idea of increasing the P and Q in the second line. I will have to give that a try. Thanks for sharing.

Txcncman,
Good catch, it's .16666 for a 6P Acme. I have resorted to the g92 threading cycle so I could specify exactly how much to take per pass. I guess I just thought the g76 was more robust than...

Anyone?

X-2.0 is the starting X position.

I'm cutting a left handed thread on the ID. I've run this same code on the x positive side of centerline and got the same result. The infeed is exactly the...

I'm running an ID thread on a Doosan TT1800SY which has a Fanuc 18i control. The G76 threading cylce seems to not be working properly.

Here is the code:

G76 P010029 Q50 R40
G76 X-2.400...

I'm running 316 SSTL stems on my Hardinge Conquest ST225B right now. I have found that a full topping, laydown style insert works best. I think mine is Seco. I do not have good results using G96...