Search:

Hello all, I'm having issues with my C32 board from CNC4PC not being able to create an analog output voltage. Ive check the setup and followed the directions from CNC4PC for setting up a KBIC speed...

Any more details on how you ended up doing it? I am having the same issue, it looks to me like you just tear out the second circuit board, the main switch, the potentiometer, and the direction...

My apologies Machineit, what specific details can I give you?

Yes, the electrical housing, and we are using serial port 1.

My apologies Mark, I am using the following settings

403 Forbidden

And cable length is less than 3 ft the Rs232 to USB is connected directly to the port on the side of the HAAS Control Box

How do you guys transfer data to CNC machines on the computer end? Do you use some sort of DNC software?

Hello all, I am really under the gun here and need some help. The company I work for recently bought a 1995 HAAS VF3 and we need to be able to send it GCode files via RS232. I really need some input...

So our machine doesn't have a floppy from what it looks like, but when I called HAAS, they ensured that we could install one with no changes to the machine. I looked on the video board and couldn't...

So my understanding is that the Floppy drive connects to the video board? Our manual shows port J12 on the video board connects to the floppy drive. If that is the case, how do I figure out which...

Hello all, the company I work for recently purchased a 1995 Haas VF3 and we (the engineering dept.) are working on getting the electronic interface working. We currently cannot connect to the machine...

Why is the Ethernet version better?

Thanks every one for the responses, it sounds like I should use SmoothStepper for motion control and PoKeys for peripheral I/O's

Hello all,

I am currently working on a CNC conversion for my Grizzly G0704, and I am hoping to use a motion controller to optimize the stepper drive control interface on a non-slave computer. It...