Search:

Semi FIXED

the spindle motor drift setting on the Siemens simodrive 611a is located on P.015 once this was adjusted so that the spindle with S0 M3 was near zero rotation the spindle encoder worked...

not to birng up an old post, i have a bridgerport vmc 1000 with a 22 tool changer, i was considering the Messa G3 but it doesnt support analogue drivers/servos's, wondering if the Mesa + LCNC would...

so far I've now tested the control board with a scope and I can see the encoder signal going in on A,B, 0 channels with a clear marker for every rotation,

checking the spindle drive unit...

FIXED

Made one very small adjustment to the instructions and got it to work,


Press "MOD" until "Code Number" is displayed
Enter "95148" in CODE NUMBER
Press "ENT" to Activate MP mode
Press...

Had a great technician out today to trace the encoder signal,

first off the machine

Encoder signal goes to Heidenhain controller card no issues, signal can be seen from the pins on the...

FIXED

hope this helps someone else with similar issues

Made one very small adjustment to the instructions and got it to work,


Press "MOD" until "Code Number" is displayed
Enter "95148" in...

Hi all,

I'm knee deep in trying to fix my Bridgeport tool changer, the spindle encoder is on the fritz, some days it likes to play ball but mostly it wont.

I have downloaded as many manuals...

hi all,

thought I'd introduce myself, I'm Adam, located in Braeside Melbourne, bought a ex BAE Bridgeport VMC 1000 -22 from south australia, had it shipped over and with the exception of one of...

Hi all,

have searched through the many many posts regarding similar issues, figured its time to actually post my issue

have a 1994 BP VMC 1000-22 with a heidenhain 2500 controller, simodrive...

Long time lurker first time poster,

I am trying to export the Machine Parameters using TNC Server. cant find parameter file program number under which the machine parameters
are stored

I have...

Long time lurker first time poster,

I am trying to export the Machine Parameters using TNC Server. cant find parameter file program number under which the machine parameters
are stored

I have...