502,212 active members
6,510 visitors online
Register for free
Login

Search:

Type: Posts; User: zavateandu

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds.

  1. Re: How to activate Optional M code Victor Vcenter Fanuc 21i

    as far as i know Victor Taichung is already implemented these M codes from M21-M24 so you need to build a new one for calling a macro.
    You should have the electrical book where the M codes are...
  2. Re: How to activate Optional M code Victor Vcenter Fanuc 21i

    can you share the ladder?
  3. Re: How to activate Optional M code Victor Vcenter Fanuc 21i

    you must use the feedback signal to the M finish line
    every M code must have an M finish too to complete.
    Start from here.
  4. Replies
    49
    Views
    2,253

    Re: Fanuc 0M number and dripfeed?

    on the machines with 0 type controller and that do not hae the tape mode swich will be no problem as you make DNC on and put on auto mode will wait for program coming from rs232.
    indeed you can not...
  5. Re: Fanuc 0i TD lathe control, LCD screen going blank.

    try to change the inverter.
  6. Replies
    49
    Views
    2,253

    Re: Fanuc 0M number and dripfeed?

    if DNC is on you need nothing more as a rs232 cable and a software to dripfeed,i use cimcoedit ,really easy ,just set it up and go.
    Let the R and G now,you have to learn about it ,now you are too...
  7. Replies
    49
    Views
    2,253

    Re: Fanuc 0M number and dripfeed?

    if you go and activate the diagnose D481 BIT 0 to 1 you will have DNC function on
    good luck

    D481.0=1 DNC ON
  8. Re: FANUC Oi MATE-TD feedrate ovverride and handle not working

    you should have 2 potenciometers,one for jog feedrate with 12 positions from 0 to 120% and one for rapid move with 4 positions from 0-25-50-100%
    if it is movinfg at 100% when you put the jog...
  9. Re: Program a blank Fanuc 31i-B hard key on control?

    zavateandu@yahoo.com if you need support
  10. Re: LEADWELL LTC-15 Fanuc 0T Parameter loss

    is nice to see that someone is involving to help ,but i want to say to you my friend that if you do not have the diagnose that include the PMC paramters with counter,timers,keeprelays,you will never...
  11. Replies
    3
    Views
    56

    Re: Fanuc Ladder not logical

    where is going that R1646.2?
    might be reset it by a Keep relay.
    can you upload the ladder?
  12. spindle load monitor on Hyundai machine

    hello
    does anyone use the Tool load monitor form Hyundai?
    i saw there are M codes created for that M95,M96
    So anyone can share the macro program that monitor the load on spindle with A nad B...
  13. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    that means mainboard or option board fault :)
  14. Replies
    18
    Views
    318

    Re: Fanuc 0T-A Z axis run away on power up

    i will go for power cable between motor and servo drive,check it closely or change it
  15. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    what show diagnose 200,201,202,203,204 when alarm occur?
  16. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    so we isolate the problem that could come from the optical encoder that should be connected to spindle by a small belt?
  17. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    so if you try M19 several times will generate the alarm?
  18. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    yes,the pulsecoder of X should be identical to Y axis so can be changed,also the cable from motor to cabinet side.

    PS:for me sounds like the there is a cable issue for the encoder of X
  19. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    ok let me understand the atc cycle:
    -magazine rotate to the tool number in spindle;
    -z goes up to reference point
    -umbrella has a pneumatic cylinder moving foward to spindle side
    -tool unclamp...
  20. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    did u have the machine grounded?i mean a solid wire from the main body to the centerline of factory ground?
    do you have equipment that is welding using same power line as the machine does?
  21. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    When the tool change is executed ,the X and Y go to reference points?
  22. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    i was not talking about the driver that powers the motors,i was talking about the servo module cards from the main board,you should have 2 identical and u can swap them,just identify it and try.
    If...
  23. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    you should have 2 axis card control on the mainboard,1 is for 1,2 axis and one is for 3,4 axis.
    Swap them and see if the alarm goes to Z or 4th axis.
  24. Replies
    28
    Views
    265

    Re: fanuc 18m 351 alarm

    try to put some ferite core on your encoder cables if you do not have,might be some noise on your wires.
  25. Replies
    1
    Views
    42

    Re: Spindle orientation 0imc

    what happend before?did u canged the belts?

    go into diagnose at 445 and check by rotating the spindle with hand if the position data from 445 diagnose is same with value in parameter 4077 when the...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4