MITSUBISHI CNC, Complete High-Speed Nano Control
...
Type: Posts; User: mecheng
MITSUBISHI CNC, Complete High-Speed Nano Control
...
The issue was in fact the notch filter parameter. The value set from the factory was way too high. The parameter was set back to zero from 400 or so and the machine runs great.
Hopefully this...
From my first post:
"The spindles are dead nuts concentric."
I guess the servo tuning may be off. The parameter which helped today was the notch filter (slp38 i think).
Anyone else have...
This machine is brand new. The spindles are dead nuts concentric. The issue we are having is we cut a part on the main spindle.
Clamp the part with the sub spindle (2 jaw chuck for square parts)...
Don't think I can help with the chip issue. I got the quad auger on a VF6SS so I hope this won't be a problem for us.
Had the same problem on software M18.03E Was setting the machine up for an ethernet connection, reboot, then pow error pops up.
I called Haas and they wouldn't give me the files (GRRRR!). They...
Well we went to see a machine with 300psi coolant through. The mist wasn't bad at all when drilling. It got worse with a face mill but still was not much worse than the flood coolant.
I decided...
I assume those of you that have coolant through also purchased the extra coolant filtration so you don't clog your tools with chips/fines.
I have a request in to the dealer for the coolant...
I am about ready to purchase a Haas VF6-SS and am undecided on the coolant through options.
The background is we have another unsealed OKK with 1000psi similar to the haas design. We have run the...
I have 2 machines and use cycle800 every day. I need more detail on your application to help. First you have to set the fixture offset G54 with the proper xyz location, also you have the option to...
If you still need help on the siemens 840D let me know. I have written a few posts for Deckels and some others. The 840 is a really nice control.
This is probaly a tolerance value to make cycle832 easy to use. You should be able to get an idea of what it does by looking at the program TOL.spf under "user cycles" or manufacturer cycles where...
I wrote a post myself using PostHaste (www.postprocessor.com). It only is 5 axis idexing not simultaneous 5 axis. cycle800 makes it easy to write a post. Contact me @ [email protected]