I'm no expert but I'm thinking you have set Z0 too high and run out of Z travel. Example is if you have set Z0 to 200mm, and safeZ to 800mm, but Z limit is set at 900mm the alarm will trip as you are...
Type: Posts; User: shuvelhead
I'm no expert but I'm thinking you have set Z0 too high and run out of Z travel. Example is if you have set Z0 to 200mm, and safeZ to 800mm, but Z limit is set at 900mm the alarm will trip as you are...
Another newbi question, does anyone know how to move the spindle to an xyz position just using the keyboard controls of the 6MD controller? Something like a Goto function but I'm guessing.
Thanks!
Hey Jason thanks for your advice and I took the ramp right off that triggered the -ve Y roller style limit switch. That didn't make any difference which was weird, so finally found a parameter (2404...
Hi.
I have a Rocktech 1325 with a Syntec 6MD controller. I want to be able to move the spindle a little further over the front edge of the table so I can do box joints on the edge of vertical 3/4"...
I'm trying to connect my syntec controller to my pc through a wireless router. Can't find anything on the interweb on just how to do this exactly. Does anyone know how or if this can be done?
I know...
I didn't myself, but i found someone who understands this stuff and he fixed it, for the most part anyway. As far as i can figure, he increased the tolerance for errors so the alarms wern't always...
Hi.
Sure I'll let you know once I get it. Not sure when that will be. Patience is a good quality to have when ordering machinery from China I've heard.
Cheers!
Thanks Jim for the advice. That helps a lot, and maybe I can use the compressor I have.
Cheers!
Hi.
I'm still trying to figure out what size air compressor I need for a HSD 9KW ATC spindle. I've read a few things but no definitive answer. Does anyone know?
Thank you kindly!
Bruce
Hi!
I've bought a new 1325 ATC router from a Chinese company called Roctech. Mercy at Roctech has been very patient and helpful, and I have talked to a few customers who have nothing but praise for...
Well I've finally done it, after mulling for far too long, I've ordered a 1325 ATC router from China. Should be here in about a month, and I need to straighten out my shop so I can get it in and hook...
Hi.
I'm about to buy a 1325 ATC CNC router from China. It comes with a Syntec control system. I use Vectric Aspire software, and was wondering if I chose the Syntec ATC PP in Aspire? Is it as easy...
Hi!
I am just about to pull the trigger and buy a Chinese 1325 ATC CNC router, but my shop only has 220V single phase. I came across Phase Technologies Phase Perfect digital phase converter to...