I have ordered those. it will take a while to arrive ,about a month ,i will report back then.
Thanks once again.
Type: Posts; User: dedeer
I have ordered those. it will take a while to arrive ,about a month ,i will report back then.
Thanks once again.
Thank you for replying.
I was actually researching the logic level shifter route but there is not that much information online or maybe i can´t find it. I have a USB breakout board ,the cheap eBay...
Hi
I am trying to build a small CNC plasma cutter and i a friend gave me 3 stepper drives he didn't use. The drives are branded as:
Phytron CCD 93-70 Mini H24
-Input voltage 17-50VAC or 24-70VDC...
OK. Thank you for answering .
I see you did not read my first post. The gantry linear rails configuration is the same as the bigger mashine, thats what i meant.
I went along and finished another project i had going on based on the same principle only smaller and it works OK so far . I still need to get a bigger, better spindle and try it but i am confident...
I designed the z-axis so you can see how it all fits together. Between the carriages is were i plan on mounting the driving screw. The actual extrusion for the gantry will be the one from the...
Hi,
I am building a new CNC router for cutting wood and at the moment i am at the designing stage. I already have some 35mm Rexroth linear rails for the X and Y axis which i plan on using . The...
It would be great if you could make a comparison .
Thanks for the reply. One more question, does the housing of your linear bearing permit adjustement? I´m asking because i saw on ebay some linear bearings like yours which have a lateral screw for...
Hi Jerry ,
your mashine is very impressive and i have learned a lot reading the thread. One quick question ,what is the diameter of the rails you are using and did you noticed any play from the...
Hello ,
a quick question ,maybe someone can help. I searched the forum but nothing came up.
At work we have some old computers on which we run Esprit 2003 with 4:3 aspect ratio monitors .I...