Hi Ken,
Do you still have this machine?
Please text me if you do. 954-421-8012
Thx
Type: Posts; User: rdgroup
Hi Ken,
Do you still have this machine?
Please text me if you do. 954-421-8012
Thx
Hi,
Do you still have this machine?
If so please text me 954-421-8012
Thx
Does anybody have a SQT 250M or others that use the MP Scale unit that goes bad and has to be replaced. I am looking fo new or used or a bad unit.
Please let me know if anyone has anything. The...
Hello All,
Does anyone have this model or the V6 with the HD spindle control with 12k rpm? I need to change params as I have a new 12k spindle installed. Mits won't help as they state the machine...
Hope someone has a MicroVu Qubix Optical DCMM with software version 2.5 or 2.7. HD crashed and don't have original CD to re-install. Can anyone help?
Thanks.
Mine is 115v. There is an internal transformer that should look kike a big dougnut inside the cab. That unit may have been wired relative to the 480v that Nasa uses. The 277 is between 2 legs. From...
Thankfully my wife is Italian and "Yes I need a copy of the english manuals".
Thanks :)
Your in luck! I backed up all my params from the 8050 I have. I am travelling and will need to have them emailed to me then I will send them to you. Can you please copy the Manuals for the proteo to...
Thanks Todd,
I'll call him. I hope he also has a manual. Barer Engineering is still in biz and parts are available.
Looks like you are moving right along. I didn't actually clamp the bar, I just used the weight and allowed it to float. Clamping can cause bowing or low spots sometimes. I just used a piece of heavy...
You got the right kit! You need to mop acetone on the crosscut with a white cloth so nothing bleeds onto the metal surface. You can absolutely use air and you will not need to use there "cleaner" as...
Did you buy the turcite kit with the epoxy (grey when mixed from a 2 tube combo with gun)? What year is the machine? Is there 2 oil lines to the table one at each end? does the x screw have its own...
Does anybody have any experience with this machine? It has a Fagor 8050m control. Just bought it on Ebay.
Thanks.
1995! PROTEO 5-AXIS HORIZONTAL MICRO-MACHINING CENTER Model D94
Where are you on this project. I rebuilt more than a dozen of these from the ground up and what your picture shows is not that bad. I recomend you replace the turcite. The ways will need to be...
Use 3d engraving but be sure you describe the "user defined" tool properly or upgrade to V8 and it is selectable.
Found these.
These came from Gibbs at one time or another.
I have several opt for Fadals I am attaching. You will need to test and tweek them.
You may want to contact CAMcad Technologies as they seem to be the Gurus with Surfcam and they have there own post processor "OmegaPost"
Eliminate the second xy and leave the m99. The m99 is the cancel and is only needed at the end of the cycle.
The Tnc530 has an automatic backup using either the TNC Remote or at the control itself. (TNC Backup) Go to Heids website and you should find the info.
Can someone please email me any programs for this machine especially complex ones that use the polar coords. I need to create a post for Alphacam and have other posts that aren't complete for MC,...
You have a user memory problem. In the manual you have a procedure to reset the user memory. The program that is there will be deleted but the communications should work fine after this.
What model machine and control? I have several sets of params but mighty is quit abstract in how they setup these machines. I have a machine that will orient the tool and change it (spindle rotates)...