Search:

Hey guys

Does anyone have any experience with the Haas oil skimmer?
I can't find much info about it, and I'm wondering if I should add the option, or if I should buy from somewhere else.

Thanks

Hey guys

Does anyone know if I can make the Controller treat several blocks, like forinstance a big calculation, like one block in "singel block" mode, so that I don't prematurly wear out my cycle...

Hey guys
Does anyone know of any small software to generate code for engraving text on the periphery of an axle using the c-axis on a CNC lathe?
I know I have seen something like this before, but I...

Hey guys
So I'm making some parts in Solid Edge V20, among other things a spool for a flyereel, and I need to get the contour from the 3D model to a usable G-code.
I'm using an Okuma LC-40 with an...

Hey guys
So I'm making some parts in Solid Edge V20, among other things a spool for a flyereel, and I need to get the contour from the 3D model to a usable G-code.
I'm using an Okuma LC-40 with an...

Hey guys
So I'm making some parts in Solid Edge V20, among other things a spool for a flyereel, and I need to get the contour from the 3D model to a usable G-code.
I'm using an Okuma LC-40 with an...

Hey guys

So I'm writing a program for some spacer discs, and I ran into a slight problem at the end.

The end part consist of three tools.
First turret B cuts an inside grove, then it gets a...

Hey guys

So I get a drawing of a part with some rounded corners and 45 deg angles, and not too much information. (See picture)
I was wondering if there is another way to do this shape without...

Daimn broby.. Thats elegant! :D
And I'm glad you took the time to add the V3 - safety counter. That could have seriously screwed me over :D
I'll post when I've tried it out

Thanks :D

I'm pretty sure I did, but I'll try it again, and post the entire code he.
I looked into schedule program but i had problems as i have to move the zero point with every loop. But i realy want to get...

I found the problem.
The G13/G14 has to start before anything else..

What you could do is optimize your cutting data. Try G-Wizard
GWizard: A CNC Machinist's Calculator for Feeds and Speeds

I'm trying to run a program that loops a specifyed number of times, but when it loopes back to start i get a P-code error, as it begins on a lower code.
I've already tried calling P-100 and P0...

Thanks for the replies..
I tryed both calling P-100 and P0, but i get the same error saying that the P-value is lower then the one befor..
Any other ideas?

Try looking into G184. This is used to tap in the face, but I'm pretty sure u can use it for cross holes to..
If I'm not mistaken, it should look something like this:



(Drilling)
G94 X60 Z10...

Is there any other code I can useto make them goto tool change positions?

Do I have to call it twice, and if so, how do I do that?

I'm trying to run a program that loops a specifyed number of times, but when it loopes back to start i get a P-code error, as it begins on a lower code.
Is there any way to reset the priority codes?

Hey guys

Im trying to run a program with an inbuilt partcounter and I keep getting an error in the IF, GOTO statement.
The error number is 423-1 wich refferes to "Sequence name where branch is...

Hey guys
Just started training on an Okuma LC-40 with an OSP 5000 controller.
I was looking for an easy way to make the tool holders go to tool change positions, and i find a reference to a G20 and...