Waitng for the result!
Type: Posts; User: HuguesP
Waitng for the result!
Nice Keep Up!
I bought a BTP 2x2 Frame and supplied my own electronics, Avid electronics is overpriced for what it is but the frame is a good value. I got a UCCNC 300eth+ub1+nema 34 cloosed loop stepper+2.2kw...
I wish this thread will continue one day!
I got them from aliexpress, XHGMAK Machinery Part Store
I more the "AEROSPACE" guy type
As you saw on my previous post,the last picture with the water distribution plate, the gasket is a 2 mm and thrust me, i have been there, if you mill your channels too deep, you might see leak on the...
I mostly do aluminum and acrylic work! Some water cooling distribution plates needs to be really accurate to not leak! I went with an acetal spoilboard
Hello,
just finished my avid Benchtop Pro 2x2 and I have a question concerning the T slot bed. Moving the probe all along the bed, i have very big Highs and Lows. ( +0.10mm and -0.03mm) wich makes...
this is for mach 3
thanks, i ll give it a try
hugues
i set up vfd as per mactec54 parameters for hy. What happenned, is that at max speed in controller (24000) i only get 380 hz (22800) on the vfd.
Documentation of ub1 board says it can only send...
Issue was uccnc was set to 400khz, and the drivers are rated 200khz, sending the signals at 200khz resolve the issue
https://www.cnczone.com/forums/attachment.php?attachmentid=440014&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid=440016&stc=1https://www.cnczone.com/forums/attachment.php?attachmentid...
Hello, made a video about the issue I have with a cloosed loop stepper driver. if someone have a solution other than replacing the driver...
https://youtu.be/yjbMu5mCc9s
Good Drivers:• Works...
thanks for the video, very interesting, i am waiting for my 2x2 benchtop pro myself. its been a month or so, so i should get it soon.
Dan! Keep us informed on how they are doing!
IN EUROPE, i would look at sorotec,
did you pulled the trigger on the benchtop pro for milling some aluminum, i am questioning myself if i go diy or get a benchtop pro. i sold my previous cnc before starting the next one, so i am here...
I have looked at the DMM 400W for a long time, as a Canadian myself it would be a good way to encourage my country, on the other side, the price is far more than what i was aiming for... Sure if in 3...
thanks for the info, I will certainly look at this and see if a belt system could fit in my minimalist build ( or planned build)
Well i guess i should then leave the preliminary investigation for others. on the other side, there is some nice thing said on youtube about is little brother, the IHSV57-30-18-36. Sorotec.de sells...
Actually i am planning for 2' x 2' moving gantry, aluminum extrusion, direct drive system. the extrusion would be machined to integrate datum plane. (misumi 8-45 ( 90x180) . Only because i have...
So the ultimate question is : would you choose this servo motor with a 1605 ballscrew or a D57CM31 + EM556S driver with 1610 ballscrew. i know you would probably choose neither and invest little more...
So at 1000 ppr, 1605 ballscrew = 0.005mm / pulse, for precision it is way more that i need, but for smoothness, i have no idea. Also, i dont understand the microstep they offer.( like for stepper),...
I was looking to power up my next build, and found those IHSV60-30-40-48. a servo + driver all in one for 113$USD , 3.5Nm peak load, 3000rpm, 0.6mh inductance, what is the catch, they are cheaper...
Hi would like to know what you guys think about those 2 possibilities, Cast iron seems great but maybe a bit heavy to transport to basement. even is I dismantle it i am not sure to be able to move...
As the title say, i am in search for a good quality 24 x 16 (6040) or 24x24 (6060) router with at least 5'' of gantry clearance. should be able to machine aluminum. i already own a UC300eth + UB1...
This is a diy router appx 575mm x 375mm of working envelope.
This include:
- router hitachi 3hp, collet 1/8, 1/4, 1/2
- ballscrew 1605 on 3 axis, dual Y axis ballscrew
- rail HR20 on 3 axis
-...