Thanks Neil. When back from my hols, I will try and trace the fault, whether wiring or driver. and report back in due course.
Type: Posts; User: Clockworld
Thanks Neil. When back from my hols, I will try and trace the fault, whether wiring or driver. and report back in due course.
Thanks Andrew. I am beginning to think I have a wiring issue. I opened up the cabinet and joggled a few wires and voila, things were much better. Matbe the wires to the Z-axis are suspect (?)
I'm...
I am merrily using my X4+ working at a 'standard' height with tooling above the work piece and all is good.
Yesterday, I needed to use a large drill and jogged the head up considerably higher than...
Hi
Thanks for the update. So I am clear, what is in the drawbar kit?
Matt
That is a very neat looking setup. What is the price of this?
Would love to fit something like this to my X4+
Matt
I don't know but ever time I use my X4+ I was told to give 2 pulls on the pump handle before use
Matt
Not sure. Will check tomorrow if the snow has subsided!!
Matt
My boards are made by East Crystal as well. I have also seen them referred to as Tonman Drivers but that is all I know.
389276
What drive did you replace it with?
Matt
Not sure what you mean by this. I have sent an email to [email protected]
Machine is an X4+ (oldish)
Regards, Matt
Hi,
It is a bit late now.
I ordered an LCD panel from china and soldered an edge connector to it and now that bit works.
The gas strut was replaced with assistance form guys on here.
Are you...
Well, it is nice to see someone is there!
You should be aware that I have sent a few emails to yourselves and never got a reply - mainly asking about spares.
I hope your investment includes after...
As ebay links tend not to last very long, I have included the link to BuyDisplay (whom I actually purchased it from):...
I can now confirm that the 400N gas strut seems to work OK. Now onto other bits of the machine!
Matt
Thanks neilw20.
I read somewhere about them being the wrong way round! I have one arriving tomorrow and will ensure it is correctly installed.
Matt
Thanks Jeff,
It looks like the head unit is approx 30kgs (66lbs) Do you think I should consider the lower spec strut (50lbs)?
In the UK, they seem to be calibrated in Newtons - and so 30kgs...
Whilst stripping my machine for cleaning, I took the gas strut off and noticed it was more like a slide whistle with zero resistance!!
Anyone replaced one on their machine? The label on my strut...
Thanks. I have now ordered one and a suitable edge connector to solder in.
Will let you know the outcome once it arrives.
Matt
Thanks Michael,
I have done that and (partly exepcted) I have yet to receive any reply.
I am now told that China is on holiday (Chinese New Year) so that maybe why I have had no repsonse -...
Hi,
I'm after the LCD panel for an X4 +
I have taken the front panel off and the LCD panel has part number: YXD-19264H15B
I don't see mto be getting anywhere with Syil direct, so thought I...