Search:

good day to all
I have a small problem with my servo bar 300 of haas, some time ago they changed an electronic card due to problems of operation in my lathe sl 10 and I had not required my feeder of...

Hi
I did not manage to recover the video in and this moment the equipment unit it was sent to service for revision, in my experience with this type of failures in the HAAS equipment the processor...

hi deepstr,
Today I was about to do what you comented to recover the software, when i turn on the machine only the screen flickers and in remains black I do not know what happened that you think is...

Hello
The software of a sinumerik 802S machine is erasied, someone who can help me, I need to recharge how can i get it and how I recharge it again?
For carelessnes (fatal mistake) never i did not...

good day to all
I'm working with a sinumerik 802S control that I stop working suddenly, i checking the control and making some adjustments and I get the axes to work but I do not have image on the...

my problem is thespindle not turn error A-501 it missing frecuency the motor, i checked moduleU/E changed the contactor 3TF2186-8BB4 1N0+1NC that was burned and contactor ofmotor in cabinet...

what complicated is the management of simocom U?
i´m starting to work with siemens controllers for the breadth of the company to forniture with machines second-hands and my work is to put on line...

hello
is 611U, sorry what is the number MLFB?
all modules were reviwed and come to the conclusion that the fault is in control card the module LT INT.50A, the card is number 6SN1118-0NJ01-0AA0...

Dear Gyro_Gearloose
if the alarm is 123 drive spindle fault and energy regenerative the problem this in control tage not in source power
in the power stage do not problem
the problem this in...

asi es al revisar la unidad vectorial trae una fuente conmutada que que al revisar es la provoca el alto voltaje al tener fallas esta te da un mal buss y no obtienes la salida de voltaje correcto o...

greetings from Mexico
I had a similar problem in alarm 123 of the VF3
check element by element until you find the fault
I found it in the subfuente commutated that gives high voltage
change the...

problem solved
sub-source commuted vector drive with damage
it was necessary to review element by element
and be testing by energizing the control card
it was necessary to change some components...

These are the alarms that present machine:


123 SPINDLE DRIVE FAULT Failure of spindle drive, motor or regen load. This can be caused by a shorted motor,
overvoltage, overcurrent, under-voltage,...

i´m stucked
someone who can guide me
My machine presents alarm by low and high voltage at the same time in the spindle
check motor, wiring and pcb's all good´s
i check the vector drive component...

Dear erikfriesen,
solved problem are 8096
very grateful for your support
i had reviewed everything and imagined it was a parameter

gracias estimado en efecto el que viene con la maquina de...

well I will review those parameters that should not be different in the years that I have worked with the haas machines do not a change much keeps a line improving with the passage of time and have...

dear erikfriesen
it´s year is 2008, i already made some adjustement without result. what parameters did you move?
with the number or name maybe it is a good guide
anyway i will check the cable,...

am sorry my english is poor i need more practice for comunicate
i´m working on taking a course to improve this
in effect used the translator for long texts
i hope i can give myself to understand...

Good day for all, change the spindle encoder of a vf3 for installation failure all right to put into operation for belt adjustment and subsequent heating rotation for 30 seconds and be alarmed by...

Asi es hablo español

Good day,
Not yet, I'm reviewing the connections again and later the parameters to see if I find something that does not match; I'm working blind because it does not signal any alarm and I have no...

good day to all, I am working on a machine with fagor 8055 plus-m control on the table brings motionmaster and in the tool changer kosakura bought the second-hand machine but does not bring any...

Hello everyone
I am new in this forum I just joined because I have a problem with a simodrive 611 in a ecomaster 7120 holz-her; the equipment does not show any alarm only appears on the screen at...