Are you helping Randy??
Type: Posts; User: daniellyall
Are you helping Randy??
Talkiet That is a simple edit I do that one all the time, I usely have it so it is a G53/G28 or a set position what is just a yes no selection to change it or G53/G28 and a nothing.
I can do it...
that is true, it will still be 50/50 that machines controller will work
just get what can do all Mach3, Mach4 or UCCNC a uc100 or uc400
you have to post in there forum and ask if anyone wont's to sell there licences
China could call in the US debt they own then you are up a creek
I have seen one of the machines that use tiny end mill you need a high power camera to set up the endmill in a collet
Have a look at what you can get in filaments Ian you can get printers for lost wax printing, you can get conductive filaments you can get them in all the common materials as a addin or made from and...
A_Camera useing some of the CF machines you have to get the printing in the direction of where the strength is needed the other direction has a lot of flex, if flex and strength is need it good for...
You are funny Ian.
Roger it is funny reading what the young guys say about all of it some do not even realise it is a cnc controlled machine and yes design for manufacture is something they all realise they need to...
You use the sitting around time to do the next Gcode and designing for the next part or goto the pub It's called lights out machining you get the machine to send a text when it is finished
The rockets that are made here are mostly done by a 3D printer, and yes they launch satellites into outer spaces from NZ
screen shot please and if you mean the different colours when viewing the different toolpaths in a setup one colour per toolpath to all have been used
They where they are now moveing over to the UCCNC system.
A axis speeds are set in the machine you have them way more than the linear axis you will need to see what is set in the machine and go from there.
Are they made in the US yet
They make some strange decision Ian the last one I ask who needs fired it was a bad one
It's a strange one this decision
The post for Mach3 realy just needs the G28 X0 removed
yes Mmpie you have made your point that is enough A
you can always say it's a 3.99999mm endmill
People who talk BS get court out in the end, you just don't talk to them. Arron has a friend with a Syil,
He realy banned Arron what a dick
There is quite a few programs not working anymore after that update
change the power cord and make sure the power supply is set to 110
I need to look into MoI3D
It's more I just needed to know if G54 was a bad idea at the start and end of the G code for UCCNC yes ger G0 G54 Z0
The newest UCCNC post for fusion has G53 one of the UCCNC users wonted his...