Search:

Yeah it is 6.8mh inductance motor but i would rather not change it to 60v that way i would have to make changes to my electrical cabinet, to change power supply and so on,,,i have changed the driver...

As i sayed, on the same cables that go to the Z axis motor, with the same connector i just plug a "healthy" driver and it works fine. So, the line is ok and the motor is ok

Hi there. I have a hobby cnc router with nema23 425oz steppers and DM542A drivers from some chinese manufacturer "Longs" i've been learning and making my machine in the past 2 years and i have done...

Hi guys, i made my own cnc table router some time ago and now im try to make some cuts but i have problem with my Z axis. I made some face cutting on 650x650mm in Camworks, the program is looking...

yup...all green now :) i guess i turn them down to improve performance but finding the "sweet spot" and it's all great. Thanks man you earned a beer for this :)

i forgot to mention that only on curved movements like arcs and circles not on straight movements i have leftover material

Hi guys... I'm having this issue in camworks when i try to do, for example a closed 8mm pocket with a 6mm end mill after i do the simulation and select "show difference" it turns out it is not a...

Hi guys...i just bought Makita RT700 and in the box it had only collet for 6mm and 8mm diameter tools. But i have a lot of tools with 4mm 3mm 2mm shank diameter tools. I try to bought corresponding...

Hi guys. I don't know if this is the right place for this question but what the...

I am starting my first moves with my diy cnc milling machine wich i plan to use it mainly for wood working...

Thanks for your time John, you saved me a lot of time and nerves ??

im using DM542A i have wire them like this: Pulse5+ and Direction5+ are feed from my 5v power supply, pulse and direction negative are connected to pin2 and pin3 on the bob. I was following the...

Hi im in the phase of building a cnc machine and i have few things that are messing with me. It's not a big deal but i could not see anywhere..if you plug your machine all the steppers are going to...