appreciate your attentions
Type: Posts; User: Hey_You
appreciate your attentions
Thanx for your comprehensive answer.
What exactly happens in the following conditions:
1. The Power of a machining center for a specific operation is sufficient, but its Torque isn't sufficient.
2. The Torque of a machining center for...
In high speed machining field, you will frequently encounter these two terms: BPS & Look ahead
What is the difference between these two? How is the performance of a machine, one with higher BPS...
Thanks a lot man.
Hi again the_gentlegiant
Thank you for your time and effort, I really appreciate that.
It's just about 4 months that I've started working with CNC, but I'm not new to it. As soon as I started to...
And BTW, the tool offset table contains Tool Height, it's wear, Tool Diameter, and it's wear in it.
Thanks the_gentlegiant
What is the difference between tool compensation and cutter compensation?
I just want the tool diameter compensaton work like the tool length compensaton, entering G41/G42 H_...
Thanks man. I noticed that I had 99 tool offsets, I changed it to 32, is there any way to further empty my S-ram? Does it help?
Long story short: I'm confused of tool compensation A, B & C. We cannot use diameter compensation and have to program without G41/G42. So, two questions:
1. How should I change the parameters to...
You're right, mine were only in German but only the (operator) messages, not alarms. The display has no problem.
Oh thank you very much drdos, I really appreciate your effort. How could you find out there is no English message? I've attached a file in my previous comments, doesn't it help?
Here it is.
The Ladder is attached.
Thanks for your time.
Thanks for your contribution.
How much capacity is needed for activating extra work offsets?
Hi all.
Recently I've tried to activate my Fanuc 16-M additional work offsets. But after turning the machine on, I received this error:
FILE ALLOCATION ERROR
S–RAM CAPACITY IS NOT SUFFICIENT....
Controller is fanuc 16m as I've written previously.
The machine is FAMUP MCX 600 with dual pallet
I found sth in a pdf, but I didn't figure out what to do. I've highlighted it for you, please...
Thanks drdos
if u know the related keep relay or data number pls inform me, I can change it.
Hi, my operator message panel language is still in German, the rest is in English. what to do?
The CRT language is in English but the Operator's messages are all in German. Parameters 3102 & 9924 are all set to zero. Any idea?
Controller: Fanuc 16M
Tnx in advance
Is it possible to use G50 & G96 codes in milling machine the same way it is used in turning machine?
Contrller: Fanuc 16M
Machine: Famup MCX 600
Tnx for your helps dudes :)
Thanks Jim, but I don't intend to spend on scanning, I just want to challenge this method by software(s). Can U elaborate on it a bit more?
Does anyone have the English manuals for famup mcx600? I would appreciate that, tnx
Hi all
Is it possible to find the finished part shape and dimensions from machining G-codes? Suppose we have all tool data and offsets and wp zero positions. TNX
Hi wowjow
Tnx 4 your help
We have encountered almost the same problem. While calling for tool no.11, the ATC stopped on tool no.12 and didn't move at all. Now it recognizes tool number 12 as tool...