Andre,
Thank you for the information! I will be reaching out today to get more information.
Type: Posts; User: schwinn83
Andre,
Thank you for the information! I will be reaching out today to get more information.
Will your software allow me to manually pick a path for the wire to follow?
Hello all!
We have a Fanuc wire machine that we use to cut PCD disks into specific shapes for tooling. This process requires the piece be cut in such a way that a tit is not left on the bottom of...
SO.....I posted a problem the other day stating that I had a 1600 line program that I wanted to scale and my machine was throwing an error.
Turns out the error Spec Code 7 means you don't have...
I tested it out and the machine does not have the option.
Back to the drawing board!
Going to look into creating a macro for scaling now.
That's surprising for how many other options they bought on this machine lol
I wrote out a program picking out exploded text with a .1875 bnem stepping down as it moved towards the center. The...
I've been attempting to use a G51 code on a text program I made in order to not have to rewrite a 1500+ line program.
The machine is a MC-V4020 with a U10M controller
I've tried several variations...
Brilliant and shining moment of idiocy has been observed!
That second G03 line in bold may look a little funny when you look closer.
Yes, it's a GO3 instead of G03. That's an o, as in oh, as in...
That's the point it reaches in single block. If it runs without single block it doesn't even show on the controller that it reaches the macro subprogram.
Keep your stick on the ice.
I created a macro for my Okuma MC-V4020 mill with an OSP-E100L controller in order to roughly perform the equivalent of a G13 Circular Pocket Milling function that HAAS mills have.
I am fairly...
Thank you tea hole and Superman!
When I came in this morning it gave me a buffer error so that got me looking in the operations manual. On the U10M controller by pressing auto, extend (F8 ), then...
Didn't mean to seem short, sorry! And the call idea is a good one. I'll give it a shot.
Sent from my SPH-L900 using Tapatalk
See first comment. Parameter has been set from the beginning. Will try saving as OTCHK.LIB on Monday.
Sent from my SPH-L900 using Tapatalk
I know this is a bit late but I use an Okuma Captain with a 12" chuck. I make hogger saw blades out of 1045 or 4150 tool steel from a 12" x 1" puck while holding less than .200" of steel. Chuck...
The company I work for uses Vollmer QM-110 as well as some Sodick A5 machines for the most part to profile custom diamond tipped tools. I have heard about laser machines that are capable of running...
As far as ODs and IDs are concerned I even have to make adjustments when dealing with the touch setter in an Okuma Captain. Coolant temperature, ambient (air) temperature, material temperature, and...
I have not tried saving it as a .lib file. I will try that next time I'm in the shop.
The text of the file is this:
IF [ VTLCN EQ PT ]NST1
IF [ VTLNN EQ PT ]NRT1
IF [ VTLNN EQ 0 ]NOT1
M64...
I'm working with an Okuma MC-V4020 Mill with an OSP-U10M controller.
I have set the G111 macro parameter to read OTCHK and have currently been unable to get the machine to recognize a subprogram....
At a previous job we had a tool holder for a WNMG 432 insert that had a line for thru-coolant to the tip of the insert through the c-clamp on the insert.
Can anyone tell me where I can find one?...