Search:

Wanted to give you guys a quick update. So far after installing a slow blow fuse the machine has not blown it. It has had a few days where it would sit off for 3-4 days and its been fine. Perhaps...

I got the fast acting fuses as that was the only thing I could get my hands on. So now that I replaced the last fuse that popped this morning with what belongs in there, a slow blow fuse we will...

The fuse was a slow blow. I could only get regular fast acting locally so the last 3 fuses were fast acting. Today I can in and it was blown again, but finally got some slow blow fuses that I...

Hello,

I recently started having this issue of my 2013 VF2 blowing a small 250 milliamp (1/4 amp) glass fuse that is on one the boards. When this happens the machine will not power up when...

I have both the smaller and larger ones from HF and have had good luck with them. The hydraulic feed cylinder did start leaking on the large one a few months ago. Both saws are used almost daily on...

I was experiencing random lost steps on occasion with my 1100. I ended up tracing it down to an issue with the controller. I would load the g code file from my usb stick to the hard drive than open...

Thats kinda what my conclusion was too when I decided to bite it and go for the vf2. The thing that I really like is that I can actually run the hsm option for up to 200 hours of run time before it...

Yeap, intake manifolds. and supercharger adapter plate and thottle body components. Stuff with lots of contouring and than the finishing passes have to be at a very small stepover with either ball...

Yeah, I figured I'll probably get some heat about that. Don't get me wrong the tormach is amazing and it really has been doing way more complicated parts than I expected. But I don't have the...

I already ordered some shars holders and collets. For roughing and initial cuts they will be fine. And actually I have quite a bit of tooling from shars and 98% of it is actually exactly within the...

VF2 is supposed to show up in a couple weeks. I looked at my garage to see if maybe I could stick the tormach in there to play around at home, but I think I'll be better of selling it and spending...

I did not purchase it as any of the packages they have put together. I put together what I wanted. I had a spare 19 inch monitor and I wanted a full size keyboard with the num pad. Vises and...

Thnx,

I actually live pretty darn close to Waukegan. But the machine is in Palatine so not too close if you still wanna get the machine. :)

The machine is in my shop in Palatine zip 60067. The machine comes with the Tormach deluxe stand, automatic oiler, tormach machine controller, load meter, shuttle jog controller, monitor, keyboard,...

Illinois, just outside of Chicago.

The day has come where I decided that I will be putting my pcnc1100 series3 up for sale. I have tried looking at ebay and craigslist to get an idea of what would be a good asking price? The machine...

Replied to all questions this morning and post has not showen up?? Strange but here we go again.

The past 2 times something that consumes alot of electricity might have come on at that time. We...

This time around i am sure nothing large turned on when thisbhappened. The machine is at my shop not home so I am in an industrial place. I have 3phaze power at shop with I believe 500 or 600 amp...

I've been experiencing lost steps for last few months too. First time around I called Tormach and they told me to reinstall everything on the pc and it should take care of the issue. It did for...

Hello all, got a question for the experienced. I have been running my 1100 since May 2012 and its been exceeding my expectations since day one. Currently I am designing a new intake manifold for...

My pump stated having the same issues. Machine is about 3 months old now. If I dont run the pump for about 4 days it won't run unless I take it out and give it a spin with some pliers. Gonna give...