Search:

I'm not sure I'm reading the wiring diagram properly. The External M Codes on FUB-P4M4 say they are for output. I don't see anywhere suggesting an input M, which is what I assume I would need to...

OK thank you. I'm looking at my wiring diagram and on FUB-P4M4 input/output card, there are 8 spots for "External M Code" (1-8). I suppose this is where the input would connect. I'll look at CALL...

So I saw a post where a guy added a simple switch to test to see if there was a tool breakage:...

Paid a tech to come out. A wire from the encoder had broken at the solder point. This is why it started failing but would occasionally work, then not at all.

Resoldered the connection, we are...

When I say "normal" values, I mean that is what the machine was calibrated to during setup.

I've experimented with a large range (from 20 to -20, and inbetween) of machines zero offsets, none...

My post processor outputs g90 x0y0a0b0 for line 1 on all of my .min files. So, I haven't moved b since before the issue and it is always set to 0.

I can measure, but 99.9% sure I'll be within...

Talked to kitagawa and they said to look for a server drive error on the okuma. I'm not sure what this means though.

I did this and now program zero call results in the same number of the machine offset. I'm pretty sure the b axis was at 0 when these issues happened.

Maybe the encoder is so far out of range...

OK, I think we are on to something. I'm far from knowledgable about changing parameters, but comfortable experimenting. I set the part zero offset for B using Calc, and normal value is...

I'm very close to 0, so not at end of travel. I'll try opening it up to look for chips...just a but nervous as I havent opened it before.

Thanks for the reply. The axis is the B axis, which cannot go 360....only about about 110 degrees and -35 degrees

Just a bit of additional information. This started about a month ago, and occasionally power cycling would get it to go away. Now it is always throwing an error. I've found references to "-...

I have a kitagawa tt180 trunnion table, and the controller is showing b axis overflow. Any ideas on where to start on this one? Attached is a screen shot.


So I cleaned my machine after milling...

Bit 15.7 set to 1 changed feed 1 = 25.4 degrees for rotary axis

Thanks to Gosiger Support for the help

Bump...still having trouble finding this feed rate setting

I need to have my gcode for a part output in G91 incremental. Is there an easy way to do this for a large part (ie; too large to do by hand)?

Is there something I can edit in the GPP file? ...

No ITF, so G94/G95 don't work.

The setting is in the U100M, not the table. Machine is 15 years old and purchased second hand, so no rep available.

My MX45 seems to have a setting for a max IPM of 400, so any time feed >400, it'll automatically reduce it.

Trouble is I have a Kitagawa 5 axis table, and feed is read as DEGREES per minute. So...

Hey guys, still really need help with this.
@budgiew @okumawiz

Thank you both for replying; I'm very new to all of this and learning a ton a long the way.

Wiz, I don't have much for axis parameters. Sorry for the poor image, but this is all I have listed. ...

I've tried support through Okuma and they haven't been able to help me out.

I have an MX45VAE and can't get shortest distance to work on my 4th axis. When I jog in manual mode, I can go back and...

Everything in my post processor is running well, except for two issues.

I'm running an older U100M Okuma controller on my 5 axis, and it doesn't have inverse time feed. How can I get the feeds...

Spoke with my vendor and they helped out. Came down to H-Length, in case anyone has a similar issue.

Edited to update the images.

Have a used Okuma that came with a replaced LCD screen from a U100L. Brightness seems kinda low. Pushing the brightness down button once makes it *slightly* brighter. Pushing brightness up once...

Just wanted to chime in here with what worked for me. Used a 3 digit display USB, OSP-U100M on my Okuma. Had jumpers setup as instructed but was getting errors as well....found that I could view...

Having some trouble with machine simulation. I overcame it some how on one test part (part a), but can't for the life of me figure out how to on the next one (part b).

The holder is not aligning...