Dear Evrybody,
I lost my parameters from controller...
At now the machine moves... and the spindle turns but tool and palette changer no works good...
I looking for options parameters the same...
Type: Posts; User: kiss
Dear Evrybody,
I lost my parameters from controller...
At now the machine moves... and the spindle turns but tool and palette changer no works good...
I looking for options parameters the same...
Yes, I tryed...It is Ok!!
Best Regards
Janos
dear friend,
I have M01 problem too ...at MH500C after accu change….HOW DID YOU SOLVE THE PROBLEM ???
Can you tell me
Thanks
Janos
dear friends,
i have hitachi seiki vm40 with seicos my3...
after on:
it cannot to booting because : motion rtc unready...alarm,
the 5. led (akku) is dark !!
i replaced the akku , but the...
Yes I know...I try the Hyundai-Wia...
there is a "small-dealer" in Hungary too , he is my contact to KIA (we have another KIA machine to) .... I asked him 1 week ago...but nothing....I wait
It is complicate...the dealer is in another country (Austria)...Ahh !...It is a "jungle"...
I wrote to KIA....ask parameters for the machine...but they are "dumb"... I wait their answere
Yes but I think my controller is good...the machine is move ...I dont know what hapened with it
I have no backup about parameters...Mainboard change ...it is not simple work..
I think it was Expired...a measured the changed battery at now : it is 3V !!!..... But I changed it ...(maybe I measured wrongly at first)
So, I talked with the FANUC office in Hungary and they...
There are 40 characters in a row....
for examle...I turn on the controller then blinking in the first row the 5th....17th. and 38th.....character .....I turn off and on the controller then...
Yes I changed battery with power on......but the first battery was very "tired"
Exactly : 2 variation of picture blinking
if change the mode the picture stay same ...blinking blinking blinking...but
I am afraid, the monitor has no problem, since on the one hand the displayed...
I have KIA SUPER KIA TURN 15 CNC lathe with FANUC 21T controller. It was out of order for months. After switching it on again, the monitor of it was displaying unidentifiable characters (I attached a...
Hello boys,
I have same problem with FANUC A16B 1212 0100-01 popwer supply
Green and rad LED is light...but I have no voltages (5V, 24V +-15V)
Can you help me anybody?
Have you got a drawing...
Hello BrotherTC31A Owners...
Do anybody use 4.axis (or rotary table) on BroTC31A ?
thanks
kiss
Thit is my problem: no switch no key to the "tape" ...to the "DNC" ...to the "RMT"
I have only : Auto..edit..MDI..Jog..Home..Handle--keys
I think I have to change param,but I dont know which...
Hello, My friends
Can You help me?
I have FANUC O-MF controller,and a easyDNCXp comminications program
Data imput -output is OK, but I cannot switch-on the DNC on the controller
Do anybody know...
I changed the condensators and washed in the CPU card before, but did not change the situation
have You got any idea?
thanks
As far as I could, I took care about avoiding the any case, which could cause one more problem.
I checked the power supplies with oscilloscope, there is no oscillation or spike.
If the RAM...
here are the pictures
the story step by step again:
1. A "checksum M01" problem appeared.
- I changed the accumulator.
- I loaded in the machine parameters.
2. The machine...
pictures
dear Jitze,
I attached 2 puctures
I summ the history oy my problem and I send it
regards
kiss
hello
i have a similar problem with cnc432 (mh500c)
the monitor shows: like a chess-table
after the first problem it worked 2 weeks and the shess-table is came back
-i controlled...