I built two drivers with the SI-7510 IC,
they do work, but I am not getting the required speed or torque, on the test setup.
I am using the original RMD596 5phase stepper motors (2.7A/phase,...
Type: Posts; User: Bad_German
I built two drivers with the SI-7510 IC,
they do work, but I am not getting the required speed or torque, on the test setup.
I am using the original RMD596 5phase stepper motors (2.7A/phase,...
No unfortunately I did not get any manuals or tapes.
That's why I am retrofitting my machine to Linux CNC.
It's a 6mm bolt with a 10mm head.
Hi mikeDX,
I also found that thread by CNC_SWE, http://www.cnczone.com/forums/emco_lathe/109988-manufacture_tools_emco_revolver_pc.html
I drew it out using the dimensions off my tool turret. ...
All the boards going to Barry Thomas,
Only the CRT is left, it weighs 4kg.
It's going to the bump at the end of the month if no one takes it.
I am retrofitting my EMCO Turn 120P and have no use for these boards. I know some people will need them.
Unfortunately I cannot guarantee that they are working as I do not have 3phase power and did...
Yes same with mine, just had that one collet.
If someone could please post a picture of the Outer Diameter Tool Clamp, so I can replicate it.
Thanks
I also just bought a EMCO turn 120 lathe that I plan to retrofit to LinuxCNC,
it came with one 2.5mm drill bit collet.
http://i48.tinypic.com/29nj7nm.jpg
So I will also have to make some more as...