I posted on a lot of groups. I thought the more I posted on the more likely to reach someone that could [email protected]
Type: Posts; User: novice5
I posted on a lot of groups. I thought the more I posted on the more likely to reach someone that could [email protected]
[email protected] would like to find someone that has knowledge of retrofitting a CHNC using the
original motors. I am mainly interested in doing away with the large Allen
Bradly Control...
I would like a post processor for the Magna turn [email protected]
If anyone has a postprocessor for the Southbend 612 I would like to hear from you.
You can find the specs for the machine by just doing a search for southbend 1218. There is a machine sale site that has specs on most cnc machines. The specs are free at the site.
I would like a post processor that works with the southbend [email protected]
I have access to the dolphin post processor. The controller is a Centroid model 4E-MD3
I would like to find a Post Processor to use on an old Centroid [email protected] I can send G and M codes that the controler uses.
I want to send out a special thanks to Jeff for his patients, time, & knowledge. Jeff walked me through getting the motors working. Thanks Jeff for helping a novice. Thanks for your kindness maybe...
I have attempted a retro-fit using mach 3 and a kit I bought from Wantai Motors in China. The steppers are model 85bygh450c-012. The kit included
power supply and drivers.
I was never able to get...
I tried moving the axis but nothing happened. I also checked out the E-Stop but it was working.
I haven't because the brake also is not releasing because I can't reset. But I will try anyway.
I still need help with reset. I have tried all suggestions but machine still wont reset. Thanks
[email protected] I want to buy a JR 105 encoder. If you have one for sale send picture and price. Thanks
I tried unhooking the red wires marked 138 and it did not help. I hooked them back up and looked to see if there was voltage coming from them. I tried from 138 to ground and no voltage. The wires I...
I will check it. Thanks
Thanks, any help is welcome.
I checked to see if I was getting power to the oiler. It should be 120 volts when power to machine is on? I had a zero reading. I had zero ohms between 2 of the wires going to the oiler which I think...
Thanks all for the recommendations. I will keep trying to find the problem. I haven't looked into the last two suggestions but I will. Could you tell me the procedure for checking the oil level...
I checked and neither switch was tripped. But thanks for the tip.
Thanks I will look to see if that is the problem
I would also like to find a picture of a JR 105 encoder as I believe that is what the machine I have uses. If you know of any encoder that replaces the JR 105 please let me know. Thanks
[email protected] am trying to search out problem. My machine wont reset. When the reset button is pushed light will go out as long as it is held in but as soon as it is released it comes back on. Any...
[email protected] have a Magnaturn 1218 lathe that is different from information I have been able to get on these. I have pictures in the photo gallery of mine and one that is different from mine....
HELP I recently bought a Southbend 1218 Magnaturn lathe. I found someone that owned one that has been very helpful. His and mine has a lot of differences. I am going to try to post pictures of the...
I am having trouble with stepper motors on a boss 6 series one Bridgeport. None of the axis will run as they are supposed to. Each seems to try to run I have removed one motor and took cover off of...
I have the same machine. If you would like to share what you are doing to the machine. I would welcome any advice. Thanks
Anyone that has made upgrades to series 1 bridgeport cnc with boss 6 controls that would like to share what they did. Get in touch with me I welcome all upgrade info. Thanks
I lost the regulated and unregulated power on My series 1 bridgeport cnc. I get no readings on any of the test scockets. -&+ 5v, 12v, both regulated and unregulated. Can anyone tell me what would be...