Hi
We have here a quite old (from about 1993) Colchester CNC 350 with FANUC 0T & DUPLOMATIC 12 turret that has also live tool capability at it with the , Lathe has lost its parameters more than a...
Type: Posts; User: Sotris
Hi
We have here a quite old (from about 1993) Colchester CNC 350 with FANUC 0T & DUPLOMATIC 12 turret that has also live tool capability at it with the , Lathe has lost its parameters more than a...
Hi
We have here a quite old (from about 1993) Colchester CNC 350 with FANUC 0T & DUPLOMATIC 12 turret that has also live tool capability at it with the , Lathe has lost its parameters more than a...
URGENT!
I'm searching for a working FANUC A860-0381-T251 HR MAGNET PULSE CODER (need the in motor SENSOR head to replace a faulty one, I will do the adjustments needed to work with our...
Hi
Thank you, I have just replied to it.
Best regards
Sotiris
Hi
We have here a quite old (from about 1993) Colchester CNC 350 with FANUC 0T & DUPLOMATIC 12 turret, that has lost its parameters due to low batteries (yes I know... owner should have change them...
OK, thank you very much for the info.
regards
Sotiris
seems you're talking about those resistors
Ooops! That makes me think twice about it... as at my case the amplifier doesn't start when it's cold (after a start up of the machine) and if we leave the machine at a stand-by ON condition for...
Hi
I;ve got a same Servo Amplifier here with the exact same fault (although it drives a Z axis at our machine). It does show the related error code and the amplifier has "9" lit up on LED display....
Hi
I have an A06B-6079-H305 Servo amplifier that had an IPM fault. The unit had shown a permanent (with either the motor disconnected od not) error "9." on the LED display of it, with also the...
Hi
Thanks for the reply.
Which DC voltages your are referring to? The HV DC as I see it goes simultaneously to both X & Y IPM modules and probably also to the Z axis one. So, I guess if there was...
Hi
we have here a FANUC 0-MD unit with a A06B-679305 3axis servo amplifier.
During power up the machine produce an error on screen "424 Servo Alarm Y Axis detect err" . At the same time on the...