Search:

Press OFFSETS. Press WORK, You can set the XYZ coordinates in G54 thru G59. Then call G90 G5? in the program.
I think the position screen is where you can set the individual axis to zero.

Looking for a parameter manual. We either lost ours, a tech took it or one has never been published. Kind of used to the Fanuc manuals. They have one for almost anything.

I need the parameter for...

This is from the Fanuc 31i B-63944EN/02 Vol.2 of 2 parameter manual. A lot of the low numbered parameters don't change from old controls to newer so maybe this can help. See attached.

1420
Rapid...

I can send you all but the actual part... strict customer policy. Emailing in a few minutes as Zip2Go.

That's the easy part. I can't send you the part but I'm also using the Kurt vise jaws. I delete all the other parts of the vise and just using the jaws.
Download the .STEP file from the KURT website...

"Ok if you want to change the color of a whole solid mode then you use the solid color change just like wire frame or surfaces. as if you use it in Model prep and say a face or the whole part and you...

No. When I use Modify Solid Face Color, the faces change as I select each and every one... one at a time. I want to change the color of the entire model, all at once, to be the one color I select...

I see it now. It says Set Feature. I was looking for Set Feature Color. I tried it and it still doesn't work.The model is from a customer. We do have SolidWorks 2018 but they don't use it. It's sent...

[QUOTE=cadcam;1157627]Like your thought to change a color of a solid or any entity you can use the F4 but the first would be to right click on color then select the solid and then pick the color...

Machine defaults to G98 and is/was during all these trials. Thanks anyway.
sigh, I'm thinking something on the main board went south.

Ok I found out when M65 is commanded, the machine moves normally but M30 or RESET disables it. Sooooo, what the heck is M65/M66 on a Doosan Mecatec ???

Gavin,
Our Doosans do not accept the M184 or M185.

Rich

G14.0 and G14.1 are 0 (not triggered at 100%) and they switch on and off depending on where my Rapid Override is set (0%, 25%, 50%, 100%) so that seems to be working correctly with the spindle on or...

After speaking with a Doosan service tech, he said it's quite possibly a board issue. in 30 years of Doosan maintenance, he has never heard of our problem.

Hey dhardt, you may be on to something. I just now turned on Dry Run and the machine moved normally but in the override federate as it should and it finished the program block without stopping but...

delete-wrong place to post it.

Dry Run is off. Also when Cycle start is pressed the machine moves a small amount for about a half second then stops but the Cycle Start lamp is still on. Diagnostics show it is still in Cycle Run....

Hello everyone. Does anyone know what can cause the machine to not move in rapid or feed mode when the spindle is not turning? We checked parameter 3708 SAR bit and it is off, we checked stroke...

Does anyone know what can cause the machine to not move in rapid or feed mode when the spindle is not turning? We checked parameter 3708 SAR bit and it is off, we checked stroke limits and safety...

Do any of you guys still have the Robodrill APC (automatic pallet changer) manual handy? Ours has been sitting idle for a few years and we need to rebuild it. Some air lines and fittings are...

Try Super Tool Inc. Lot's of drills & reamers. Gundrills too.

For the life of our maintenance guy & myself cannot find the 6V battery(ies) that hold the XYZ home position. We get alarms 300 & 306. There are NO batteries in the battery compartments of the servo...

Never mind... just find it when clicking someone else's topic. Why this button isn't on the Main Page is a mystery.

I can only reply to current threads. I cannot find the button to start a new topic. :-(

I have the same problem on a Doosan with Fanuc control & servo drives. We can't find those batteries on the servo drives. Would the batteries be under the red cap of the servo motors ?

We have a Doosan with APC ALARM 306: X AXIS BATTERY ZERO and the same alarm for Y & Z. I cannot find the batteries to replace them. They are not in the battery compartment of the servo drives and...

Posted in wrong place. Started new thread for Fanuc servo drive battery location.

Marposs programming manuals for Laser tool setter. Scroll down to see the list.
http://www.marposs.com/download.php/eng/machining_centers_milling

We have the Mida Laser 75p for tool offset length setting. The macro that came with it started at Z machine zero and came down slowly at around 60-100 ipm but that was changed to rapid down to about...

Not sure but whenever we turn the spindle on with M3 or M4 we always use an M5 to turn it off, even at the end of the program with an M30 or M2. We used to have a control (can't remember which) that...