Search:

Did you ever get this fixed

Ok gents, another update,

we've got to grips with the Hass, but I also have an old Heidenhain 145 Bridgeport which I use for engraving, does anyone have a post for such a control for use...

A little update,

thank you Partur ,

we have learned a bit more once we opened up the post and had a playa round with it, things have moved on quite nicely ,

we also found a whole...

the program is already posted in mm,not inches,

Gents, its been a while but i'm back,

so here's my story,
I have many milling programes for my fanuc control leadwell machine posted out with the generic solid cam post. all we have to do it ...

Ok gents ,its been a while but I'm back and in need of guidance,

so I recently bought said machine described as good condition,[that's debatable] as its clearly been stood for a few years and...

As above gents, my leadwell vmc had stopped working as the spindle alarm light has come on, once this has come on nothing will move, even in jog, but I can reset it and jog about , when I...

Thanks for the helping hand bill,

but I have an update,
the damne things is working almost flawlessly now, it ran for 6 hours on Wednesday and then it has a hickup with then 085 error, so I...

Men I need help. or I think I do,

I have had the ladder programed recently for drip, I am using easy dnc but even with the settings as per they recommend I am still getting an 085 alarm, [...

Hi Men, i'm hopnig someone can shed some light on this for me,

this is a 1988 machine new to me, with OMa controll, it jogs about at rapid speeds , tool changes at what i asume is normal too...

try a search about 4 months back, i had the same problem and some kind folk posted up some links, i have a set filed in my docs but cannot paste them up, and my photobucket account has gone all...

which part do you doubt, iv'e explained it as it appears to me,

what i have just remembered is that the day before it started blowing the min spindle fuse , that when i changed a tool and flicked...

yes it is the same as yours , but i think i have found the problem, after talking to hardinge support it turns out the fuse that keeps blowing is for the main spindle motor,

i started stripping...

Once again i'm back with yet another problem

my miller ,although slow is was getting the job done untill this afternoon when it stopped dead suddenly half way through a jopb,, no previous...

Thanks men, i suspect a seal, i'll pull it apart and hopefully find something obvious


carl

Hi Gents, it was working just fine this morning and when i came back from lunch the damn thing is playing up,

when i press the button to either increase or decrease speeds i can hear the air...

yes ther eis , but mostly in German,

i have found two sets of parameters off this site by googling, and bothe are different, to each other, and again both are different to the origional set i...

Yes it is a 145.

it would be interesting if i could also learn what each parameter was for .


cheers carl

Thanks for yourr imput, but iv'e worked Martin out already, its his job to give advice but he's just not interested in older stuff, i did speek to Mark also ans as you say a totally different...

Andrew you are bang on , it was low lube level.

having got some very basic and not too helpfull guidance from the Haidenhain tech support, i called hardinge and the first thing the chap said to...

HI men, and women if there are any,

sorry i have not introduced myself previously but,

i really do need some help with the above fault code,

i called haidenhain tech and they said the...