Search:

Hi Gerry,
The up-dated M6 works as advertised! :)
Thanks again for your help!!!
Gene

Here's my email [email protected]
2017 Screenset had been working, I can't guess what may have changed.

I am running the 2017 Screenset and I've checked to make sure that "Automatic Tool Change" is checked. When I try to run an 'M6' the spindle goes to the tool change location but the spindle will not...

I tried to add an M5 but it wouldn't run the M6.

Here's the part of the gcode that is made using Aspire 8.0. Looks the same as other gcodes I've used.

N84410G1X2.3859Y1.6058Z-0.1250...

UCCNC had been running without any problems. But now when an M6 tool change comes up in the g-code, there is a problem. Problem #1 - The spindle goes to the tool change position but the spindle will...

Go to "CONFIGURATION/AXIS SETUP/SPINDLE" and check "PWM Spindle". Be sure to check "port & pin" settings.

Hi Dan911,
PM Sent.

Counterfeit UC100 motion controllers are being sold on Amazon !!! I should have known because the price is only $55.19.

WALFRONT
1PC 10CM USB Cable+25 Pin USB to Parallel Adapter Converter CNC...

[QUOTE=ger21;2200408] When you cut a circle, and it has flat spots on opposite sides like that, it's a mechanical issue 100% of the time. If it's a software issue, I've never seen it.

Hi Gerry...

Thanks Gerry for the reply. I built this EVO in 2016 and it has worked without any mechanical problems what so ever, until now. As you see the axis are rack & pinion and there are not that many...

Hi Gerry,
I checked all of the set screws on the steppers. And ran a test:(:(:(
When I ran Mach3 this morning I lost control of the VFD & spindle. Looks like I need to reinstall Mach3. I am using...

I have a Smooth Stepper but was never able to get to run right. May have to try again to get it to run if push come to shove.:confused:

Thanks ger21 for your help.
I agree I don't think it is the Mach3 or the PC.
Tomorrow I'll check the steppers on the X axis. Everything feels tight but it is easy to overlook something.:idea:

Hi ger21,
thanks to all for the comeback reply's. I checked the coupling on the Y axis and changed to a back-up copy of Mach3 on my PC.
I also swapped the X - Y KL-5056 drivers around. There was...

These should have been 'circles'

I ran the Drivertest.exe.

My DIY 3 axis CNC has been running for about six years using Mach3 - R3.043.056 using Automation KL-5056 drivers and a C-10 BOB. Now all at once there is a problem with the steps moving out of line....

Using CorelDraw X7, when I run the macro for RDWorks 8.01.18 A get a pop-up.
https://www.screencast.com/t/B1puaoGqIr
Can anyone help me get past this pop-up?
When I first installed RDWorks & CD X7...

Unlike some people, I am not made of money.

I would like to update everyone on this problem with Thunder Laser tech support. Ben had forgotten to send me the replacement motor. I am also guilty of forgetting sometimes. Well that has been...

With the fine detail work a laser cutter-engraver will do "accuracy" means a lot.
I think you are saying that I should have bought a laser machine that is made any where but China. I would LOVE to...

Mr.handlewanker,
Let me see if I can educate you just a little. You are right, the motors on my laser are not true "Servo Motors". But I can tell you this the "Closed Loop Hybrid Servo Motors" are a...

Hi Michael,
If you are referring to Lone Star Laser in Whitehorse, Texas this is owned by Clay Lutterll. And he is the person I bought the Nova24 from. (Nay 11, 2017) Only thing, they do not carry...

Last week (Wednesday the 24th) Ben at the Thunderlaser factory in China and I did a skype to figure out that the X axes motor on my less than three week old Nova24 Engraver is bad.
Ben told me that...

What should the focal length for a 2" lens bee set to. I have seen two or three settings.
Gene

I'm looking at a Thunder Laser Nova24-60W. And adding a rotary attachment to the machine. I see that the Nova24 uses servo motors for X & Y axis. Does the rotary have to use a servo motor or will any...

Way, Way, WAY out of my pocketbook range!!!!!!!!!!!

I'm looking to buy an Laser engraver from G. Weike Model LC6090. My main concern is the U.S. Custom Service and what kind of hoops I need to jump through when the Laser gets to Houston. I'm told...

Using Mach3 sometimes I get a "Error triggered - 3336" along with some other error codes and when it happens it is all but impossible to recover X & Y zero actually and I loss the project. I'm hoping...

At present I'm using Mach3 and the 2010 Screenset. If I switch to UCCNC and the 2017 screenset is it required to use the UC100 or UC300? Are can I still use my DB25 parallel port cable with the C10...