Hi could i get some help on Crazy Drills. I am using 30XD for 14 mm holes in grey cast. And from the cutting data i've used S22000 F330 Q0.5 and the drill broke only after 60 holes. Even pilot drill...
Type: Posts; User: IfeCro
Hi could i get some help on Crazy Drills. I am using 30XD for 14 mm holes in grey cast. And from the cutting data i've used S22000 F330 Q0.5 and the drill broke only after 60 holes. Even pilot drill...
Hello have you solved your problem or still stuck.
Yes there is a possibility that your machine kinematic parameters are a bit off
Of course you can you can use some of many measuring cycles for 840D.
You should write an .SPF and call it whenever you want.
Use measuring cycles programing manual for it ...
Hi
Have you solved it?
I can help you if you want it is all writen in _OVR variables
Hi Ian.
Well first of all great machine choice with amazing control IMHO best control there is.
We have DMG with Siemens but our Hermle is with Heidenhain but i think i can give you a few hints....
Hi jlavery
Can you please send me some code that you are using on that machine we will try to edit some old posts for that machine.
Thanks
Hi what do you mean it doesn't work. What doesn't work.
TRAFOOF ?
We have HURON also
Hi jan.van.gent
Did you found the right solution to align the workpiece with plane function?
I was wondering if you could help me to do the same because i am also stuck with that. I need to...
That custom cycle writes the values by it self into my result file
But if you never wrote any of your own cycles i think you might be in trouble.
I am not sure if i can explain everything in...
Yes it is possible.
I am not sure if you can write on network location, but you can do that in your WPD or SPF or MPF directory on the machine.
You can do that with WRITE command.
I am using...
Hi kotlas6667
Can you explain more in detail what are you trying to do i think i might be able to help you
Hi McMaster
I think i can help you with what you need
If i understood everything right it should go like this
T10 D1
M6
G0 G90 G17 G94
G54
CYCLE800(1,"DMG",200000,57,0,0,0,0,0,0,0,0,0,1,,1)
Hi there.
Can you please tell me something more about the program you are trying to do i'm also into programing my own cycles.
I am not sure what are you trying to do with base offset or why...
Hey guys it's me again i have just one more question i think hapo may just be the guy with the answer .
So here it goes.
I need to align my workpiece with cycle 998 the thing is that my control...
We just got HSC 55 linear with sinumerik 840D Solutionline.
Tomorrow we will make first chips on it i cant wait for it.
It is fast i know that one.
And it looks like a beauty.
I worked on Mori...
Thank you DMC635V and Hapo
You both helped me alot.
I did it pretty much all right but i made one big mistake.
After calculating my angle and writing it with $P_UIFR[1,Z,RT] i didn't programed...
Hi again
I have made some drawings for example.
So if you can please take look.
Thanks
Thank you so much for your reply.
Sorry it took some time from me to get back to you, i was absent last few days.
I will make some sketches tomorow so you can see my part and what i am trying to...
Hi all.
I have some problems with frame rotation on Sinumerik 840D.
So i have 5 axis vertical mill with swivel table and i am trying to align my parts with custom program.
So i made a program...
Hi all can someone please help me with safe approach on Sinumerik 840D when using measuring program. Is it possible and if so how can i write it.
I am using mesuring program writen by miself and i...
Hi all
Can someone please help me with operation and programing manual in pdf.
The machine has maps IV and some of the manuals are in it but i don't think that is all and frankly i don't have...
Yes you're right it's from NH and i will take your advice on M19 very good tip.
And who are you sir you seem to know Moris like no one i have ever met.
I might have a few questions if that is ok....
Yes that macro is added by company that sold our machine i do not know how are tool and palette changes done elsewhere but i have it like that. And also when our last machine was delivered M01 was...
G65 P9862 B1. T #148
This means that the tool number that will be measured is stored in parameter number 148 (#148 is parameter). Write some number of the tool let say T20 in parameter 148 and start...
Mori Seiki uses sub program for tool change if it is newer machine like the one i am working on.
It is O9001 and all you need is to edit that program. It is missing M01. If you still haven't found...
Hi all.
I came here if someone would be willing in helping me writing measuring program for Sinumerik 840D
Powerline. I am an operator trying to get my life little less complicated becouse as for...
Thanks higgy55 this works great.:)
Hy all
If someone would be kind enough to take a look at program i made for measuring workpiece with sinumerik cycles.
I have never done any kind of measuring with machine outside JOG mode so i...
Hy again can someone plase take a look on what i have and tell me what do you think.
I think this should be just fine but again...
Can't be too carefull with this.
Hy all my program is almost finished soon i will start testing.
Also have learned a lot past few months about Sinumerik thanks to cnczone.
Special thanks goes to folloving users tfisher and...