Not sure if you're using Mach, but could it not be your spindle on delay if you do? In Mach go to: Config > Ports and Pins > Spindle Setup > General Parameters. and set all to 0
Type: Posts; User: dj_nexxus
Not sure if you're using Mach, but could it not be your spindle on delay if you do? In Mach go to: Config > Ports and Pins > Spindle Setup > General Parameters. and set all to 0
@Jim Dawson, thanks for the info, I knew it should work I just needed the second opinion... willl be trying it later and will post an update.
@A_Camera - Thanks for the input, but just want to...
good day guys,I have a small cnc and wanted to separate the pc from the machine, my idea was to run the step and direction signals from the breakout board through a cat 6 cable to the machine where...
AARGGH - do you have an email for Leo or do you purchase it via amazon?
Cut is not to shabby for a hand tool.
277918
Offering up the parts for the Z Axis
277916
Z Plate already Cut into parts
277910
I was looking at that option, but until I can do better I will have to use the SBR20 and stick to aluminum and stick to extemely shallow passes on steel until I can rebuild, I was looking at 25mm 4...
Gantry Supports
277908
So it has been over a year since I got a prototype dremel based cnc working, and had to dismantle it, but I have now decided to create a larger medium sized CNC with a main view of machining aluminum...
Thanks for trying, but I decided to try solidworks instead and I must say I am now converted, not using Alibre anymore....
Good day, I have been searching online for the past hour with no luck, I am trying to create an assembly and one of my parts is "X - Rail 50 - Left.AD_PRT" and there is a "Right" side version of this...
Great service, bought 3 Nema 23 stepper motors from them and I am located in the Caribbean, shipment was quick and painless. had a problem with 1 defective motor (Just a manufacturing defect) and...
Soundtrack - Gladiator - Now We Are Free
Well Just as an update, I have been using this circuit in place of the motor resistors and chopper circuits for the past two months and IT WORKS!!!
I have looked at the voltage in and out with a...
Yes I am, sorry, I have to get used to the way this forum works, I was having some trouble posting pics of my machine, and when I did a search for my post I did not see it, I did not realise it was...
Well I finally got a chance to take some pictures and decided to share with the community that got me started, I have only just started to build the machine and it is verrry far from where I would...
I would like to be the first to admit there was a bit of miscommunication in the beginning but automation technologies ltd sorted everything out they made sure the problem was resolved a special...
I don't like when I am taken advantage of and in the same breath, I like to give credit where it is due. with that said, Automation Technologies Inc contacted me and are working with me to have the...
Thats my problem I live outside the US, I live in Trinidad and the cost of dealing with tech support via the phone or sending the motor back would cripple my already depleted buget.
Hey Guys, I recently bought 3 of the following motors from Automation Technology Inc..
High-Torque Stepper Motor, Stepper Motor, Driver, Stepper Motor kit, DC Servo Motor, DC Servo Motor kit,...
Guys I need some feedback with regards to using the LM338 5A regulator to provide the constant current requirement for my CNC machine
...