Search:

I recently upgrade to new PC hardware and as a result I need to reset my SC10 settings after the fresh install. I saved off all my custom default files, like my tool library. Now that everything is...

Found it on the Tormach site

Be sure to watch the video on how to use these files. https://www.youtube.com/watch?v=q0iUxGMpQhs&feature=youtu.be

Both methods worked like a charm. I had thought that I had previously tried the "Contact Point" height, doesn't matter, I got it now, Thanks!!!!

That is fantastic if it comes out as an update! :cheers:

@mountaindew @Phillyb24

Thanks for the help! I'll give these a shot and let you know.

Yeah that doesn't look right :D I believe that is the only one I haven't tried. I found a few error in the others that I corrected. I'll need to see if I can find the original post but I suspect the...

I'm trying to cut a part off of the stock piece at the bottom of the part. I want the top of the saw to be used as the cutting point and not the bottom.

The default settings have the saw cutting...

It was suggested that I also post this here in addition to the Tormach forum.

I couldn't find the original post so that I could add @mountaindew data that he posted for the TTS Saw Arbor. So I'm...

I couldn't find the original post so that I could add @mountaindew data that he posted for the TTS Saw Arbor. So I'm reposting all the TTS tool data I have to date in case someone needs it.


...

How much did this approach cost?

Thanks everybody.
Great information, this helps a lot.

I thought about moving it as one unit, but the rental trucks mostly have 77" inch high openings and the 1100 is 80". The taller opening...

I just purchased a used 1100 series 3 and I need some information on removing the 1100 from the stand. The 1100 is out of state so I can't look at the mill to determine what tools I'll need. I was...

Where can I find version 3.4?

I sent this to Syil Yesterday

Subject: BobCAM

I just started using BOBCAD and I'm looking for the post processor you mention on your support page:

Our splendid Post Processor for Bob CAD...

So the above checked out on a short several minute run. I'm going to expand this to add more different X & Y movement and increase the feed rate just to be sure.



This will be my next approach.

He only used it for a few projects and he needed to sell it for the $$



I also bought the computer with it. However I added a GFX card and loaded WinXP & Mach3 on a new disk. I still have the...

I've purchased a lightly used Syil X4 mill with a PC loaded with Mach 3. When go to run my gcode for my part (using Bobcam) I seem to be getting inconsistent axis movement. I'm not sure if something...

To clarify one point. The shank is dia. 1/8 the flute length is ~.4" and so the end mill is protruding from the end mill holder at .4, basically only the flutes are exposed not the shank. Reducing...

Ok I need help since I can't seem to figure my endmill breaking problem. Here is my situation. First I'm using a Syil X4 standard cnc, with Mach3 and BobCAM v25 (which is much improved)

I'm using...