Ahonen, the resolver has to be setup correctly if you have removed it and not re installed correctly. Have you got equal voltage on all 3 phases.
Type: Posts; User: pfp
Ahonen, the resolver has to be setup correctly if you have removed it and not re installed correctly. Have you got equal voltage on all 3 phases.
Did you get sorted as those are the normal settings
1297339194179346 Cincinnati Arrow 500 750 1000 owners
hi we have a facebook group now as well as this great forum.
hi how much for the 4th axis
This may be of use to someone the start up and tool setup instructions for the fnc controller
check all the connections that go to the spindle drive. There are some that are on a small metal serial connector and easily break.
Did you get this error sorted 9036?
The files should be in the C drive.
You have a C and D drive. The only thing that should be in the D drive is main.SOC do not touch this file or drive as you will break the memory module.
Install...
You should also have a main .cfg that needs changing the same
In your params file you have simulation mode selected and needs changing
like this it should be
G 7 'Global parameters
ARROW 'Identification
0.13 'Revision
2nd Feb 1996 'Description
0...
1) On the PC, start CNC_COM (refer to the "Arrow Serial Communications" procedure)
2) Enter the test mode on the FNC controller. (Press the reset button on the power supply module and...
Hi you need computer with old version of windows up to XP
Cable Configuration
9 pin 25 pin
1 8
2 2
3 3
...
Hi I have the same spindle drive and today drive has failed did you manage to help the other chap?
What is the gearbox/transmission being used for.
Just another thought reading your original post I did have some issues myself when I tried to wind the slide manually past one of the stops.
Please post your results be it positive or negative.
regards
Phil
Hi not sure if youve sorted this but it sounds a bit like my denford zeroturn . you need the stop ramp to be there. sounds like you have not homed the machine properly after re starting the machine....
Did you get this problem solved???
Hi I would prefer to use yours as a test as I have seen it working unlike the other bits of code posted.
I would then be sure what I am going to do will work.
Hi mate I know this was a few year ago but would you be able to share your code for this operation. cheers
Hi Guys well started lathe today and home button working ok. some other button seem to be a little temperamental so guess its due to the cold
workshop and lack of use the last couple of weeks.:(
Hi phucrobusl, do you have a fault code on the 4 digit display on the spindle drive board. If not press the mode button and the up arrow and go thru the perameters and post them so we can see if...
Hi thanks for that. What is the procedure to get to this diagnostics screen. I have the Fanuc OT B control and it is the membrane type that is a problem. I believe I may have the the ladder diagram....
Hi sounds like your spindle drive parameters are not set correctly. What model fanuc do you have
Hi anyone with any ideas. Today I turned on my zeroturn lathe and some of the buttons seemed not to work at first but after pressing them a few times I was able to use the machine to make three parts...
You may need to have the spindle drive repaired
Hi did you fix your problem aventtini
Hi did you get your arrow up and running?
Hi did you get your arrow up and running?