F10.(decimal point) or F10
try G1 G91 A180. F1000. maybe
Type: Posts; User: generaldisarray
F10.(decimal point) or F10
try G1 G91 A180. F1000. maybe
you have mail, yay.
What make is this machine anyhow?
I dont think you could MDI G0 if you didnt have a successful zero return.
What F did you try with the G1?
so G0 only on the rotary axis via MDI right?
i see additional axis control as well as additional axis simultaneous control as separate options, but nothing about only G0.
I have several Harvey tools in our vending system.
I literally dont do anything but use them and new ones show up.
We use DECO Tool for our vending. I send request by email to add/ remove items...
Do you mean PMC/Ladder?
I would invest in a phase perfect converter. That voltage sag can damage the drive.
the cost of a Phase perfect is probably half of what that combined spindle/servo drive will cost to repair.
Do you have the user macro option? The G31 skip option? if yes , then yes.
If no, then I dont think so.
MDI this #100=1
if you get an alarm you dont have macros.
if it digests that, and...
Do you not have any relationships with tool jobbers where you are?
You bought Techniks - through Ellison?
the zone and industry arena were the same forum, only skinned differently. Now you have to jump through hoops to see industry arena that you didnt have to in the past.
You toolchange issue is in...
did you look at the post in the link?
I have dealt with a very similar problem. Fanuc 15mb. Buzzy ramdomly jumpy X axis. Spent a bunch of time messing with the parameters and trying to work around the scale feedback. The ballscrew did...
The MCC contactor is not pulling in because the SVM cannot give the Vready sig back to the control. This is a symptom, not a cause.
If I had to guess, I would say you either have a bad pulsecoder...
Your drives have high DC voltage on the copper bus bars under the flip up covers. You can KILL yourself if you touch them.
for 6066 series drives, wrong drives but describes (2) led good...
This post is guaranteed to work with bolth PowerMill AND Mastercam. On ANY TYPE of machine a Fanuc 31i would be on.
https://tinyurl.com/dymbb3a
I dont know about the pulse coder. And we still dont know what series control it is. So it could be a pulse coder. It sounds like a pre-serial pulsecoder that is timed wrong. They will jerk when...
First, leave the control alone.
Who tested this motor? Stevie Wonder?
What are the Megohm values they got?
is this like a 0MC or 15M or what
your boy TerryBerry posted a video that should be informative for you. He explains a little more in depth about Inspection Plus Macros in a part program.
https://youtu.be/b96PgNhmujA?t=270
when...
I have never seen that probe before. Its not even that old. The receiver and interface were std for a long time
https://resources.renishaw.com/en/details/mp12-probe-system--7859
Have you seen...
I mistyped its 8898, maybe you dont have it in an older install. But, you are not showing any 8000 series programs in that pic
9832 is probe on though, I dont know how you dont have that.maybe...
A mp12 is fairly old. but the ONLY thing you are losing out to on a newer one is the length. They work the same.
step one. go to renishaw.com and get a user manual for inspection plus. An older one...
again
https://www.cnczone.com/forums/tree/346952-cnc.html
this guy did exactly what you are talking about, both editing the ladder and c version upgrade.
As you can see, it took a literal...
how about this
https://www.cnczone.com/forums/tree/346952-cnc.html
the Miyanos that use the 0T control and the g110 are a super pain in the butt.
If you have the manuals, they do not behave exactly as they describe. The g101 behaves in a unpredictable manner for me...
the rollers in a one way bearing are hard hard.
like Jim said you need to make a aluminum split collar to clamp on the screw.
And a pin drive socket.
most importantly and urgently you need...
Like with a gun drill? Done it many times.
Gravity my boy, its not just a good idea. Its the law.
Seriously, Gun drilling in a horizontal is affected by gravity. Just like on a gun drilling...
Macro B has the ability to use higher level math. Thats the only difference according to the Fanuc 6 manual.
You will probably never see Macro A in the wild. They were both options.
It used to...
this guy is pretty good
https://www.amazon.com/S.-K.-Sinha/e/B003KU3EL4?ref_=dbs_p_ebk_r00_abau_000000
So why do you think you need it? By it not being a included option should clue you into the fact that you are going "off the rez".
A two axis lathe can do anything you would want from G54 with...
resetting the PLC ladder?
An 0i-MF (the current model) would not have Tape/Rmt mode
After a bit of research I think you are in the wrong sub-forum
Just because chairman Mao put a Fanuc sticker...
It must be a single spindle lathe, or a swiss since it is a 32. You dont have G54~59.
It would probably be a Fanuc option that you must purchase.