So if the G97 is the "safety line" set at 3600, what is the G50 "maximum speed"? Do they do the same thing?
Type: Posts; User: lostpinky
So if the G97 is the "safety line" set at 3600, what is the G50 "maximum speed"? Do they do the same thing?
Can someone explain the need/advantage for the use of the G97, G50, G96 that the previous programmer placed at the beginning of each of his programs. I don't fully understand what he was doing and...
Are you talking about the tolerance on the cad side? Or the cam side? Or in the optional fields that you fill in as you are creating the tool path?
I am having trouble with a poor finish when I generate a tool path from a solid works model. I can send the solid works model to anyone who can help.
settings are:
planer tool path
0.25 tool...
thank you for the tool post grinder link. I did not see a price or dealer information. Ar you a dealer?
I found this great F&S calculator. This one is simple to use, just find the material that you are machining and fill in your cutter info:
Feed Rate Calculator
sorry, thought the lathe and mills were both covered in the same place
I took over here at a new job and have never programmed a lathe. I have a basic programming question about the lathe. The guy before me set up his programs so that all you do is set the Z tool...
I did try to draw the profile in BC and then run the G92. That was where I ran into problems not knowing how to fill in the box. I found what the different letters ment, like "Q" is the thread start...
This is my posting
http://www.cnczone.com/forums/bobcad-cam/134611-not_sure_where_post_1_a.html#post981418
I ran into this posting, but no code....
http://www.cnczone.com/forums/general_metal_working_machines/20839-1_4_npt_need_g.html
I have been beating my head against the wall all morning learning about lead in angles and X and I and P1.....I have a Haas Lathe, I need to cut a 1/4 NPT, seems like someone some where in the...
Wow, thanks!!
Every morning I am getting this error message. I wiped the sensor off with a rag, any ideas what caused it. What is the "grid offset"?
166 Y ZERO RET MARGIN TOO SMALL - This alarm will occur if...
I don't know if this thread is still active but what are the other parameters here?..Q,F...this was written by a previous employee and should cut a 3/4 NPT but the tool does not follow the same path...
I signed up, thanks
they told me level two tech support is what I needed = $399 includes one hour training
Why you have to merge the tool, then create the tool path
How to do a rough cut then finish
i am in the los angeles area, but I can get help by phone.
I just started a new job and I need to learn how to program for a lathe (Haas TM). I do mill programing well but the lathe section of BC version 21 has me confused. BC wants $300 for a one hour of...
I am having trouble with a new machine. I downloaded the Hass TM rev1 post from the BC site but I am not getting the required "%" at the beginning and end of the program. The Gcode is also missing,...
the problem tennsmith, if you look at line 193,307,420,534,648,763 they all have a return to clearance and all of them are different. If I were running a single part that was simple it would be OK,...
I am using VM 5.0,11,11 with a Centroid post. I agree that Andre has back plotted and shown the first lines of the code but the problem is in line 101, so if he or you could back plot a little past...
I have my clearance plane set at .250", part top at 0.00". The porblem is at line n101 where the tool lifts to 1.00" wasting a bunch of time.
N96 X6.789 Y1.671
N97 X6.739 Y1.683
N98 X6.688...
I thought you could back plot the Gcode and see what the tool path was doing. The problem is not in the drawing, it is somewhere in one of the boxes that I have to fill in when I am setting up the...
I have a basic oval that I need to pocket. My end mill is not a center cut end mill so I need to ramp in. I created the following Gcode and I don't understand why the tool is returning to 1" on...
This is a sample of the bad Gcode, below that is the good Gcode:
H DX=10 DY=10 DZ=10 -A C=0 T=0 R=1 *IN /"DEF" BX=1 BY=1 BZ=1
C=0 E=2# S=15000#
G0 Z=0 T=101
G0 Z=0.2 E=2#
G0 X=1.5 Y=2.4...
sorry about that, I am running V21...I know it is easy to change posts in V24.
"Zip up the Post, the good code and the bad code and someone will take a look at it for you."....you mean at Bobcad? ...
I have a customer with an SCMI router. BC gave them a KerrXlog3 post and it does not seem to generate the correct Gcode. BC is telling me it will take two weeks to review my post request. One of...
I might have that V19 tut...