Did you ever get documentation. where from?
Type: Posts; User: cncchewer
Did you ever get documentation. where from?
Enter zero diameter for a center cutting tool such as a drill or tap..
Hello tphan,
Welcome to the CNCzone. I do not know how your machine exactly works so these are general comments.
Alot of the lube systems I see today are a timed released. The alarm would...
thermal alarm sound like a thermal overload is tripped. Lube alarm sound like the system doesn't think it is being lubricated. Check all breakers and overload and fill up the oil
Sorry if this is a duplicate. I though I posted this on Saturday but can't find it.
I'm helping with a large program -20 hours plus. New to the NumeriPath 8000 control I'm trying to replicate a...
Nicotrel,
I see the S series is not so readily found on the web...sorry
Provide me your email address and I see what I can do.
As far as the manual numbers. I determined from I-docs. see...
S series is
spindle Description = 65012E
servo description = 65002E
ac servo amp maintenance =65005e
built in AC spindle description 65052e
S series AC spindle interface maintenance= 65045e
...
Easily found on the web.
65160E
Let me google that for you
65165E
Let me google that for you
When looking for manual don't pay too much detail to the proceeding letters and rev number....
There is not much increase in function but fixing of bugs for a win7 machine.
My v6.2 would generate error on some machine "The Signal size should be displayed is over. Please close some...
Anytime I get a memory card error I always format the card on the CNC and not the PC. Do this from the boot screen.
Burke
The parameter manual is Alpha Series AC Spindle Motor α Series
Parameter Manual
GFZ-65160E/02
Alpha Series Motors and Modular Drives
Maintenance Manual
GFZ-65165E/02
Older manuals readily...
It depends on what the error or breakdown is. More info??? Were the softkeys working before? What are the status lights on the drives? What does the machine do or not do?
If the softkeys have not...
There is a point you need to understand. A parameter list from any other model-variation of your machine will be no help at all. You need the list from the manufacture or might get lucky from a close...
Do you have a printout???
Many questions but glad to have a little dialog.
Where is it over sized/under w/ the 100 deviation. What is the shape? basic drawing or sketch. Feed rates?
Burke
Hello Dale,
You have bigger issues. Several of the parameter are unique to your machine. The list is not generic. You will only type in the number if you have a printout from your machine.. See if...
Hello Jim,
These are machine specific macros. Good luck on finding someone with the same vintage and model machine. Call the manufacture and have them email them to you.
Sorry can't help
Burke
Power on is just that.
Operating is thought of as "in cycle" or while in automatic which include cutting time but stops timing during feedhold.
Cutting is time in cut - g1, g2, g3
Free time can...
Back looking into my programming setup issue today and noticed a few gaps in my previous post. This is a 5 axis job. The multiple holes are being drilled radially around "C" axis at 3 different...
Hello all, took on a small job and was told the DMU50 had a Siemens control but it is actually a Heidenhain T426. I'm a strong programmer but not with Heidenhain language. The job is real simple,...
If I understand it correctly, your CPU is halted or not started. The 3rd led on the option pcb is the key. what is the option board. could be a servo fault or bad i/o link. sent you a private...
I revisiting this older post from Walz.
Fanuc Ladder III v 6.0 errors and crashes
"The Signal size should be displayed is over. Please close some windows"
I now have 3 different...
Hey homeboy,
I always have the ABS screen display what is programmed. Zero is zero.
There is a simple parameter change that toggles the absolute display take in account the TLO.
3104 # 6...
Thanks 2149 for the quick reply. Nice document. I will try to digest a little later and get back to you.
I'm in need of another example or better explanation of the ladder programming manual. I read the maual just fine but can't get it to work so I need to see one example. No of my archive ladders are...
perfect
Thanks again
burke
Thanks for the quick help.
Now that I want to toggle it always a 1 or a 0, I will have another data table with the oposite value and always hold one active with a NO and NC contact. Agreed?...
Fanuc WINDW(SUB52) to macro variable (FUNC 22)
Can someone provide an example rung of the SUB52 WINDW to macro variables -function 22. I have looked through my archives and can't find any. I am...