548,278 active members*
2,473 visitors online*
Register for free
Login

Search:

Type: Posts; User: machinehop5

Page 1 of 17 1 2 3 4

Search: Search took 0.01 seconds; generated 50 minute(s) ago.

  1. Replies
    3
    Views
    46

    Re: Z Axis Troubles

    ...check the Z axis motor Tachometer.....dirty or failing older DC Servo Tach's can cause ruff, jumpee or a Overload condition to occur during axis movement.
  2. Re: compact flash problems....Please help!!

    ... try looking for hidden files.
    https://www.google.com/search?client=firefox-b-1-d&q=dos+comman+for+hiden+files

    Win10 most likely driver problem. Also try Linuxmint.

    good luck hunting.
  3. Replies
    6
    Views
    124

    Re: Tool Clearance in program

    ...try using a minus sign (-) with T call to stage tool magazine. T-xxx
  4. Replies
    23
    Views
    308

    Re: A real bad day

    ...the ground wire. looks like it did its job, what failed was a breaker/fuse antlog logic link do sences/stop the short to ground.
  5. Replies
    11
    Views
    161

    Re: DNC Problem

    ...few more things that we need to know/check:


    What PC software is being used to DNC to CNC?

    How is the Cable wired? How many wires,,,Is it homemade?

    Are you using XON/XOFF for Flow...
  6. Replies
    11
    Views
    161

    Re: DNC Problem

    ,,,that extra M6 may be causing problems.

    quote:
    (DRILL2)
    M6
    N17235 T5 M6
    N17240 S4200 M3
    N17245 G54
    N17250 M7
    N17255 G0 X3.3 Y-2.0625
  7. Re: Cant cut accurate circles - Any Ideas what to try next?

    ...knot sure how UCCNC Exact stop works or is coded but, have you tried it?...most of the time high feed rates can give unpredictable results if, not under the control of an error/lag factor....
  8. Re: GCode Junkies Please Educate Me / Help Me Find The Issue! GRBL "Bitsetter"

    ...so, why is there a G49 Code if you never need it? If, you do not cancel TLC at the end of each Tool you are setting yourself or the next person to a possible crash due to an Active Offset.
  9. Re: GCode Junkies Please Educate Me / Help Me Find The Issue! GRBL "Bitsetter"

    ...G43 and G49 codes may need to added to your postprocessor.

    T1
    G17
    G21
    G90

    ...insert G43 Hxx here (xx= tool offset number of your choice) or somewhere before the 1st Z axis move
    ...
  10. Replies
    2
    Views
    114

    Re: A Axis Amp Fault

    ...most likely the A axis Glentek DC AMP-0006 has failed and the only thing in Field serviceable is the 15amp Fuse....If, possible replace the AMP-0006 with the out of production Advanced Motion...
  11. Replies
    7
    Views
    214

    Re: Memory size

    ...save all programs....delete all of them....then add a known size program...and commad ME again. then do the math
  12. Re: Rigid Tapping G84, reversing feed out faster

    ...Tapmatic vs Ridge tapping..Fanuc was thinking flexable...sweet.

    Thank for the 5200 report
  13. Replies
    7
    Views
    214

    Re: Memory size

    ...depends on your CPU 1400 board version number.... most likely 384k or less max upgrade in your case.
    https://www.cnczone.com/forums/fadal/9601-maximum-memory-88-88hs.html

    Calmo can be a little...
  14. Re: Rigid Tapping G84, reversing feed out faster

    ...a work around would be to write a Macro or subprogram or what ever to G91 the Z tap depth with 1st feedrate, than 1.5xfeedrate going up. Basically a custom bore cycle.
  15. Replies
    13
    Views
    1,132

    Re: Decode Delta 50 Parameters and PLC files?

    ...love it when a plan comes together.
    Just a thought about plans....if,your machine only needs another Main Frame and is wired for a Dynapath with all the Files/Params/etc...just buy another...
  16. Replies
    13
    Views
    1,132

    Re: Decode Delta 50 Parameters and PLC files?

    ...after re reading this thread I see you have the SR file now...if you email the SR to me I can produce a Ladder Diagram for ya with ASSEMB30 program I have access to. Check your PM's for my email...
  17. Replies
    13
    Views
    1,132

    Re: Decode Delta 50 Parameters and PLC files?

    ...backwards engineering is maybe the hard way trying to decode the Dynapath logic would be a waste of time. The only thing that may help to convert to LInuxcnc is the "Installation Manual" for...
  18. Replies
    10
    Views
    305

    Re: Ball screw returns

    ...machine shop 101...need more engineers.
  19. Replies
    36
    Views
    770

    Re: Grid O' Holes

    ...the #1 problem with holes in table....cleaning out the coolant, chips, rust. etc from previous jobs by the time you need to use them.
  20. Replies
    1
    Views
    189

    Re: Copying FIles getting Changed

    ...yes, Setup your post processor to start renumbering after N9999 Max then N0001 again. Also, you can insert/add blocks if and when editing using a decimal point. Nxxxx.xxx format of 4 place...
  21. Replies
    0
    Views
    246

    Re: cable transfer diagram PC to Miiplus

    ...manual may help you
    https://product.heidenhain.de/JPBC/image/FILEBASE_PUBLIC/599456-02-A-02.pdf
  22. Re: Flipped part and chamfers are offset on x axis

    ...use a nevusor nully Dial Indiccator...when Jig boring holes...
  23. Replies
    3
    Views
    180

    Re: square pockets

    ...G09/G61 Codes
    https://linuxcnc.org/docs/html/gcode/g-code.html
  24. Re: odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath

    ...Hi RT,

    .. found the problem...for some reason the Moxa 5210A unit is dumping the last 200-300 blocks. It maybe something is not set correctly but, I tried for days (pull hair here) every...
  25. Replies
    18
    Views
    342

    Re: Off the wall idea

    ...physics of machining is the only limits of what if, we try something different. Cost vs what if. Pull broaches are special build machines for splines are good example made for production for a...
  26. odd problem missing blocks with Buffered Input...aka DNC drip feeding a Dynapath 50MU

    ...discovered a odd problem when using the Buffered input on a Dynapath 50MU....the problem seems to be affecting only the last 200-300 blocks at the end of every program I've tried. The blocks are...
  27. Re: Personal license 2020 changes to file export

    ...I agree with ya Mr Metric....The Twilight Zone of machine codes. Skynet101
  28. Replies
    3
    Views
    1,215

    Re: fadal 4020 88 HS post processor

    ...X2
  29. Replies
    7
    Views
    315

    Re: Software problem

    ...Dynapath is still in business, but they will what to sell you a Floppy upgrade $300+CNC exe cost. Call or email them with your Serial Number of the CNC control you have....
  30. Replies
    7
    Views
    315

    Re: Software problem

    ...check the Battery voltage on the SRAM Card....should be above 3.1vdc. Replacement is easy with add-on battery pack because there 3 Pin plug for battery.

    ...to clear the Watchdog Timer you...
Results 1 to 30 of 497
Page 1 of 17 1 2 3 4