Search:

Or may be someone have sst-1500 for sale?

the problem was found. My amplifiers is a special series :-(

Does anybody have a firmware for sst-1500? Will try to change firmware if i will find it.

the price has been reduced

the price has been reduced

was try to change 1<->2 pins as in manual.
still nothing :-(

Hi there!
Does anybody else try to connect SST-1500 to PC?
I try to make it a couple of days but steel have nothing. Try different COM ports on different PC. Software was downloaded from teknic.com...

the price has been reduced

the price has been reduced

the price has been reduced

the price has been reduced

the price has been reduced

Video test:

https://www.youtube.com/watch?v=LSn10pMFvt0

Test:

https://www.youtube.com/watch?v=mZEVVrkj3jA&feature=youtu.be

Direct drive NSK Megatorque motor PS1018KN201 + Driver unit EDC-PS1018AB500
- dimensions d100x135 mm, through hole d35mm
- torque (nom / max) 6/18 N*m
- speed 300/600 rpm
- absolute encoder for...

photo

Hi!
Will sell 8 servo drives NSK Megatorque for rotary axes, rotating nuts, direct drives etc.
Located in Russia, ship worldwide.
https://www.ebay.com/itm/193423105647
Ask me if you wand to buy...

almost works!
https://www.youtube.com/watch?v=Lkr9FPNCie0

Yes, it may be bad optrons on board. But how can i test in? I need to exclude the possibility of my wrong connection to kflop. I was checked: 3V cames to the opto-board from kflop. 24V cames to...

Didn't inderstood your advice :-(

Ok, If i'll inplug 16-pin cable I 'll can check what wires of board accordance to JP4 pins. Didn't want to disconnect cables to avoid another burn, but Ok. So If...

Hi! Here is the scheme of connection. I need to unplug 16-pin cable from kflop and measure voltage? In what 2 pins in 16-pins cable? I looking for a "flags" in kmoution I/O window to find an...

Hi!
Try to connect external board with opto-isolated inputs to kflop. It will be board for limit switches. I was connect it to JP4. No I need to determine what pins in kflop meet screw terminals. By...

So if i need servo amplifier to work without halls i need only 3100 series? It's software has label "ignore halls".
I ask because my friedd couple of years ago try with 3100 and its work well. But...

it was simply contact brake in my self-made communication cable :-)

https://www.youtube.com/watch?v=ELSuJQUQrCU&feature=youtu.be

Hi!
have the same drivers (CSDJ 200W). Try to connect it for test. Strange: "connecting failed". It may be because i choose "CSDJ Plus" type in new project but my drivers is "CSDJ"?

Hi!
Looking for any information about Allied motion sy334-z/21A servo amplifier. Strange - nothing about it at Allied site. All that I can suggest - this it a digital amplifier fot the motor at...

Hi!
Looking for any information about Allied motion sy334-z/21A servo amplifier. Strange - nothing about it at Allied site. All that I can suggest - this it a digital amplifier fot the motor at...

Thank you!
Can't find soft in Internet. Is it possible to download it anywere for free?

Hi!
Does anyone know something about this amplifier? Can't find manual and software. Have ABB servo motor (see photo). Can I drive this motor by amp-0056?

Have the same problem. Does ahyone hava "ETEL TOOL" soft for this amplifier?

thanks all for the answers! will try something.