Search:

http://www.mach3cnc.com/
mach3cnc usually has older boards or can upgrade you for a very respectable cost. Let John know you spoke to Bill from NJ!
Hey Antonio!
As long as there was nothing ligit...

what?

Harvey Tool . Com
They make very small tooling and doing an 0-80 will be just like a 5/16-24.
Be the Cutter...

My post does not put the G41 on a move that my machine is acustomed to see. After I post and go into edit[predator] I bang in a "D" value on the Z feed move and I'm in then . . .

Usually you can contact the sales person you bought it thru. I'm preparing to sell my 4020 '91 with all tooling and will start with a salesman from a local distributor.
My time to re-tool.\ !

I have beeen using GIBBS since 1996. . .
All of my pgm's are on cd or a thumb drive.
My memory in my machine is only the pgm I am running.
Keep it clean [like momma said. . .]

The chiller was unhooked since we don't normally turn the rpm's way up(always under 6k). I hooked it up and added RV antifreeze (it was bone dry).
Bone dry. . . . .
The liklehood of some growth...

Yo Bro! i gosta an '85 SL-3H with a 12" gorilla.[been in my shop for @ 3+yrs.]
I called a compad're who has the same monster he bought new "back in the day" and called him with the same lube...

Many times doing an initial run on my sl-3[h] I take a really good shot chest high but I get over it.
Keep your saftey glasses on yo!

An associate of mine recieved a 6030 VMC with a modified Fadal control [not the original control from what I understand].
FYI this newer model does not have the Z axis counterbalance weight.
(This...

I'm a day away from replacing my belts, I got the pre-shrunk ones [like my jeans] !
I didn't get the stone-wash ones though, can't see them behind the cover. . . .!

Jimz, If you are experiencing random command inputs, I'd bang out the keypad too. Never heard of them doing something like that, could be a short in there somewhere. IMO spend a couple dollars get...

Thank you for the direction Cadman

Fanuc,
Do you have any literature you possibly e-mail me?
Thank you

Thank you both,
I look foward to more info when you get the disc Fanuc.
Cad, I have no idea where the screw would be.

Nervis1
It's not the heat. . . .
"It's the humidity"

http://www.reatechnologies.com/repair.htm

Iv'e sent a couple boards here for repair. They are reliable with a decent turn around time too.

I am doing maint. on my 4020 and will be checking the play in the axis. I might encounter the need to adjust the gibbs.
I would apreciate any advice or input with correct procedures involving...

This is what I'm starting with.

I am working on learning G71 with a simple turned part, Still need some input with this.
I would like an example program for a part;ie:
3.375 od X 4.062 long.(stock)

Al,
The spindle drive still has the green light, only got the alarm on the crt. With any luck I'll be ok. Butt [always a biggie] where is the item you mentioned located?
We are getting buck bost...

Thru discussions this morning, we concluded my input voltage (246vac)
needs to be stepped down. A Mori/ Fanuc guru I met today (he's from Japan)
did ensure these machines like a soft and comfy 200...

Starting a job tonite, ran some testing and left the machine on for a while to pick up some tooling, come back and set tools, start to run a pgm and I get an alarm.

OT 112 "Current Excess (DC...

One more

I recently traded up to a Mori-Seiki SL-3H turning center. This chuck was wwith the machine. Can anybody tell me who made this?

I recently recieved a Mori-Seiki turning center [sl-3h].
Looking for a parts manual for it.
Contacted mori and they want over $200.00 for it.
Any help is appreciated.

I built one for large tubes. Used a Dayton DC motor with a variable controller, grounding I did thru the driven shaft with a spring loaded copper plate on the end. TIG 14" dia. flanges to tubing all...

What.... you guys typing with your "big toe" huh? WT_

Chip load per tooth
the amount of material being removed by each flute per revolution
see the formula:
10,000 rpm x .0015 [this is calculated by .0005" per flute x 3 (number of flutes)]
feed in...

?