Search:

Or
instead of G5.1 Q1
You can use G8 P1

There are differences in the results

I've owned a few Matsuura's over the years. They are absolutely rock solid machines. VERY reliable.
Accurate, fast, easy to set up. Scott at Methods is awesome.

You haven't really told us how many parts your production requirements are.
If you are getting 12 parts in 2 hours, that's a 10 min run time. that is with a 6k spindle. With jsut a jump to 10k, ...

Looked in my maint manual.
K11 adn K12 are the CW and CCW relays.
I don't recall which one didn't work awhile ago. Now it works both dirrections. I had reseated them both.
I'm thinking a weak...

No kidding...
Really.
The entire fiasco is well documented here and on PM. I can assure you that I am just about the most easy going guy you've ever met. I'm not kidding when I tell you that to...

This is well documented with Selway.
I tried calling the factory and they have never to this day returned a call.

I'll give that a shot
Thanks

Geof
I have a job I run on my little Box way Sharp. 1018. I take a 4fl variable helix altin EM 1000sfm, .375 axial and .375 radial at 110 ipm. runs dry of course.
Awesome to behold...
Chips...

Probe or no?

Go to offsets, and if you have a probe, touch off each tool.
Then work offsets and call t0101 in MDI, touch the end of part and scroll to G54 Z type Z 0.0 and press measure.

2000 mini.
toolchanger will only index in one direction. not both
What is the problem.
No I'm not calling the repair guy.
If I can't fix it cheaply, it's out of here.

I have a Daewoo and had an SL10. Both are 6" machines. The Haas is "claimed" to be a 15hp machine. It's not. The Daewoo is in fact a 20 hp machine. It will run the same program about 30% faster...

You could have bought two thread mills for the price of that tap....
And it would do the job nicer and faster. Not to mention lasting longer....

On my 0iT control, touch tool off, offset page, type: Z0.0 then press the measure button.

Battery (APC) replaced. Machine homes in X but not in Z

Is there a value I need to input in the parameters somewhere?????????????

Machine was moved and not under power for 4 months. Phase was incorrect not allowing machine to power up. Hyd pump threw an alarm.
re Phased power input, now find battaries are in fact dead. ...

Lynx 220a
Henning Chip Conveyer.
I want to opperate the machine without the chip conveyer.
Get an Estop alarm.
Also have a light "APC" flashing at teh same tiem as the Emergency light on the...

Only wants to turn one dirrection. Not the other.
Is this a motor or os this a switch.
If it's a motor, it's outta here.

The guy has been gone since Feb....

4th is an option. There are two options actually, one is just the cableing. The other is the whole thing with all the cableing and the servos.
Mine (2412) has a 0iMc control. You have to...

opsie....

I wheel cut eveything right to depth. One pass. I would spin up a mandrel large enough so that the cutter was well supported and left about .25 to cut with. Releave the inside of the mandrel and...

You haven't told us a thing about your speeds and feeds....
Machinery's tells us to drill (HSS) at 20 to 40sfm. With your half inch drill that would be 153 to 305 rpm. feed is .007 to .015 per...

This machine has been actually quite reliable. Sometimes the toolchanges are a little noisy, I spray a little WD40 up in the spindle and work the tool release button and that cures it for a while. ...

Finally figured that "What the heck...it's a Haas" Used a pry bar and out she came.

2000 Haas Mini
Ran fine yesterday. Fire it up today, home it and get a tool fault. Do the toolchanger recovery, Tool will not release...you can hear the solinoid, but no joy...

Bet ya a dollar the issue came from the cad system. Tighten up the arc settings in the cam system...

Is it VDI or stick toolong?

HOLY CRAP!!!!
a thou and a half at the turret from shoving on it????
In my opinion that is completely unacceptable.

Yea, but those are Canadian hours Geof....
Snerk.

Mastercam will millor anything in about three mouse clicks.
Transform, mirror...