Hey Guys,
Doing some face milling on my EM3116 and have found that the cutterhead is not square to the table. It's off enough that on a L-R cut the l cutters are taking over a thou after the R...
Type: Posts; User: sonicjk
Hey Guys,
Doing some face milling on my EM3116 and have found that the cutterhead is not square to the table. It's off enough that on a L-R cut the l cutters are taking over a thou after the R...
A little more information:
Encoders are 2000 counts/rev
4:1 Gear reduction on the servos
Ball screw is 5mm/rev
That makes the whole system 40,640 counts/inch
Resolution of .0000246" per...
I picked up a Dyna Em3116 for super cheap a couple of weeks ago in working condition.
Machine is good and tight and worked well other than the 1998 controls. The guys I bought it from left it...
The machine has build stickers from '98 inside.
I'm about at my wits end here I can't find any pattern here it's completely random.
Before just randomly replacing obsolete equipment I'm...
Reseated the Ram to no avail.
Thanks!
I'll give that a go.
When it boots up it says Dyna V4
Hey Guys,
I just picked up an em3116 that works great, until it doesn't turn on.
In the mornings it sometimes just doesn't want to power up. The control LED's flash in sequence like they are...
Okay first post around here, thanks for the awesome forum.
Hoping someone can help me out here.
I've had my cncrp 4896 pro machine running for over a year now, I manufacture butcher block...