Search:

With 533 removed the red led 1 on 721 turns on with NC power, turns off for a second, then turns back to solid red.
With 521 removal the red led on 721 is lit solid red as soon as NC power is on...

1) Please remove all the input out put cards (QX531) and then power on the machine to check if LED 1 is still red or not.
>I do not have a 531 card
From left to right I have a QX084,...

LED 1 is red LED 2 is green.
I believe the issue is on the 141 board. I will likely buy a board on ebay or send it in for service w/ mits. Ebay is 800-1200 and service is 1200. Part of me wants...

Hey guys,
I have a meldas 500 on a Daewoo Puma 6S that occasionally will turn on, usually it doesnt. When I hit NC power and it does nothing (it might beep and I can hear the icecube relay in the...

Attached are pictures of a tool post grinder/live tooling attachment I made to replace a pneumatic die grinder attachment (also attached). My attachment is nearly silent and has more power. I am...

Thanks for your replies, I just got back in town so I havnt had time to work on the machine, I am working on it now and I checked the wire and parameters and they are all right. The mill has a rs232...

I have a comet cnc machine with a 320m and I am trying to set it up for rs232 dnc upload and download of programs. I have a cable with the right pin outs and stuff, but I just dont know what buttons...

Hi, I have a kitamura mycenter0 (1985) with a fanuc 10m with a tape drive and rs232. I want to drip feed or do direct downloads/uploads of codes from my computer. I have a cable with the correct...