When I quote any job, I always put "Quote valid for 30 days." Then they need to re quote and we also will not split an order over more than a 30 day period.
HTH
Gary
Type: Posts; User: grinder_gary
When I quote any job, I always put "Quote valid for 30 days." Then they need to re quote and we also will not split an order over more than a 30 day period.
HTH
Gary
If you post in English, maybe some one can help you.
Gary
If it is a PCM file, try the plasma forum. There are alot of people there that can convert a PCM file for you.
HTH
Gary
Thanks for the reply Gerry,
I am just trying to find a starting point for V bits. I understand what you are saying about the style of bit.
Gary
I am finally set up and getting ready to run my table.
I want to try to do some experimenting with V groove bits.
I can't seem to find anything as far as feeds or speeds or even chip loads to...
You ask for everything, give nothing. You are told some of the files you want can be bought from someplace that makes the files, and you keep asking. Most people who buy the files will not share them...
I have searched but cannot seem to find what I am looking for.
I am building a 48x96 router table. I have the X axis are to long axis. I am having a hard time trying to figure out how to level the...
The problem with a DXF file is each program can use it a different way. As an example, I use Bobcad for structural drawing. I have not had much trouble with that DXF it outputs. On the other hand, I...
Thanks for the responses. I am going to add more supports and then plywood with a couple sheets of mdf. I will seal it up and see how it goes from there .
Thanks
Gary
Thanks, Now i remember that from years ago reading on this forum.
Wife calls it oldtimers, lol
Thanks
Gary
Seeing as I have not started to build the base of the frame yet, I understand what you mean. We, my partner and I, are discussing how high the top should be so we can machine certain sizes of...
Don't mean to sound dumb, but what is a torsion box?
Gary
No this table is strictly wood products. I understand what you mean by needing a frame under the table for support of the sheets. I just am trying to figure out what way to do it. Can't seem to find...
Here is a picture of the frame as we were building it.297952
As you can see not much there.
Gary
I have a PP plasma table with the HD gantry. It came with a router mount.
We are looking to change out to a router for a long time job we bid on.
The water tray slides out but what are people...
I previously built a Precision plasma table and have had it make money for the last 5 years.
We have the materials and another gantry coming for a new table but this one for a router. The work...
Yup, know the feeling. No support, but bug you all the time to try to get you to buy the Newest version all the time. I have given up on them and use different programs now.
How do you expect us to help if we can't understand you?
Try ENGLISH!
You can index your sheet to do what you like.
This thread is not used anymore. The original poster has gone his own way and the forum just died off.
If you search in the plasma section on...
You tube is your best friend when trying to learn this. Look up Steve Good coral tutorials. He does scroll saw work but the program is the same methods.
Gary
You tube is your best friend when trying to learn this. Look up Steve Good coral tutorials. He does scroll saw work but the program is the same methods.
Gary
I was basically looking for someone to talk to about the plasma cutting industry as a small shop. I have a 4x8 table and do production runs in mostly 3/8 and 1/2 inch material. I also do some art...
Thanks Gerry,
Appreciate the information,
Gary
I tried to use the settings Ron supplied. They worked ok but the X/A axis would bind in different places. This only happens with jog or travel to a cut on the plate. I'm thinking the rapid speed is...
I am using a IBM XP sp2 Mach 3 only. All other axises work fine. I will check it out though with another computer I have for a back up that ran a small router without any problems.
thanks
...
I have the PP heavy duty gantry with drives both sides. I set Mach 3 to the settings Ron supplied for the motors I have from Tom at CandCNC bladerunner.
If I jog slow or medium speed, the gantry...
I am looking for a file of Mario from the Mario Brothers for a young kid.
Can anyone help?
Thanks
Gary
Hi,
I have a 4x8 table with CandCNC controls with THC. Hypertherm plasma
I am looking for anyone in and around Edmonton who can maybe give me some advice.
Thanks
Gary
I have the HD gantry with electronics from CandCNC. Set up and running was actually quite easy and Ron sent the settings for the set up. Worked super close. The only real issues I have had is the set...