Hi if you’re still interested let me know
Type: Posts; User: agguilar
Hi if you’re still interested let me know
SUPER nice machine!!! and the colors are my favorites!
hi all, here is my machine
well i talk to the seller on ebay and he is selling the gcode to get money to upgrade on dropbox.. well to make the story short i got the gcode for free yes free!!!:banana: all i did was install...
CHECK THIS ONE OUT IS COOL!!!
mach 3 Engrave toolpath Gcode | eBay
the info is from the person that sold me the board....
ONBOARD RELAY CONTROL FOR TB6560 BOARDS
The Toshiba board relay is addressed through pin #9 on the connection cable for the 3 axis
board,...
hi, i have one of this board, i purchase from a seller on ebay and they work grate with some modification on the driver, but right now i have a problem i was not using my cnc machine for some time...
hi micr0carve do you have the plans (dxf) file of this machine ??? i will like to make this one is just so simple in design
sorry, hi can you please upload a video off the set up you use to cut the cable carrier, or the program you use, i will like to cut some of this parts but im new to this programs, i have vcarve pro...
hi can you please upload a video off the set you use or the program, i will like to cut some of this parts but im new to this programs, i have vcarve pro and mach3 any help will be greate. thank you....
Greate idea !!!! Im in. And i know alot of members are going to find youre site very useful. Good luck
hi do you have the dxf file for the t rex???
how much for the dxf file ????
help please !!! can some one please tell me how can i cut some letters like on the picture using vcarve. thank you all
wow
can some one please share with me the program signcut pro i have the older version with key code generated by the site but some day they said that the software signcutx2 need some upgrade to the PRO...
can some one please put a video making one of this thank you.
Looks greate!!!
yes, nema 23
yes is the same one i send the plans you send me to AllRout CNC Routing Service. like you said but never got a email back :( ,so i m finishing the one i started, even so i just got a new machine., ...
good machine A+ on design
great work one of my best cnc design i seen and i have seen allot, well here is my smaller version i made with the plans i purchase
This is the pic of the machine
OK, I just finish seting up my CNC router only ting im having trouble is MOTOR TUNNING. I have the TB6560 driver with 3 200oz 1.8 degree stepper motors and /8" 12" (turn per inch) acme ,single start...
thanks you for the info
i have the same problem i have a machine and dount know how to set it up please help,,, any one,,, HELP!!!!!!!!!!!!!!!!
i want to buy vcarve pro i only have the trial version :( and don't have the money to buy the full version her is a picture of Wat i want to cut
hi all i use a game-stop xbox 360 controller and is working fine
can you post a picture of youre machine?
thank you joe