Hello
I did a project on machining a simple shaped impeller on DMU60T 5 axis of our university. it worked pretty well but I was forced to work in the limited M56 range which is the default one...
Type: Posts; User: Zaher
Hello
I did a project on machining a simple shaped impeller on DMU60T 5 axis of our university. it worked pretty well but I was forced to work in the limited M56 range which is the default one...
thanks panozeng
to be more specific I am asking about the case where you have a filter unit applying vacuum to some basket under the cutting torch and that basket is attached to a hose which can...
Can anyone help with providing a value for the Temperature of the Exhaust gases of the plasma cutting (rough estimation is fine)
WSS and Jim thank you very much for the Help and the info
thanks for the help WSS
do you know what the diameter might be if the cable is shielded?
you mentioned standard clamping for this torch, do you mean standard in size?or is there a standard...
I am posting this again here because it seems the right place to ask
I need to know the Cable diameter of T100M torch machine, I can't seem to find that info in the manuals
thanks
moved to Hypertherm forum
these are a lot of options Dave, thanks for the fast reply
I'll take a look on the bolts you mentioned and see what fits
thanks davereagan
yes I am using Allen bolts but they are Stainless because I am using them in WaterJet Machines where rust may occur easily and I wasn't paying much attention before to the bolt's...
Hi guys
Can I get a recommendation on the Bolt's grade should be used to mount HIWIN rails knowing that the bolt size specified in the manual is M5 and tightening torque 883 N-cm (or 90 Kgf-cm)
...