Search:

Good to know.
The lowest priced spindle I have found is the Kress 800 FME with the tool changer attachment that comes out to roughly $1200USD

Right now I am trying to build the budget for the...

I would advise against the tumbler idea you will just trash the large faces and not round over the edges very well. I have tried and ended up with nothing but splinters left over. That was with a...

Jeff
I am trying not to get wrapped up in a budget at this point. I am just trying to see what is available and work backwards. That being said I would like to keep it below 7k USD all in. Tooling,...

Jeff, small chunks of wood, at most 8x8x2

Gerry, that is a nice setup. Something like that would work very well.

Hello

I am hoping you guys can help me out with some options. I am looking to pick up a small desktop 3 Axis machine, the big issue is a need a tool changer with a minimum of 4 pockets.
I use...

Thanks for the replies.

I hadn't thought about ebay I will keep an eye on that for anything that pops up.

I was looking at the Kress spindle but I can't find any information on what an SK15...

Hello CNC Zone

I have to say it has been a while since I have been on here the growth is insane, I hope this ends up in the right spot.

I am looking to pick up a small desktop 3 Axis machine,...

The machine sat off for over 15 hours as I was hopping the repeat alarm was stuck in the RAM but this didnt work.
From what I hear Geof is out having fun and letting us figure stuff out ourselves...

yes that is exactly what I need to do but I can't get the alarms to clear long enough to do anything.
Its like the E-Stop is pushed in and I cant pull it out

Hello all

I have a Super Mini with software version M15.05 that is the last of the "old" colour LCD screen

I have a set of alarms that I just can not clear 249, 251, 212
I know what I need to...

Geof I have finally finished my pump. I went a bit more extreme then you have. I ended up building a hybrid design that incoperates a high volume side and a high pressure side, all self regulating. I...

I did look at a manual yes but the one I have on hand is too old I guess as I now looked at the one Haas has online and its in there.

Thank you for your reply and as such turns out this isnt the...

Anyone know of where I can find a discription on how to use G200 on a HASS? anything at all would help

Hello and help please.
I went to turn on my mill today and at start up I got 219 Z Phasing Error I cleared it started spindle warm up and the computer beeped screen went black and the computer...

I am looking for an external floppy drive I can plug in to a Haas and have it act as a USB thumb drive.
I have used a Sony MPF82E-U3 external floppy drive with flawless results but I need a 2nd...

Hello all
Im looking for a simple software for cutting letters and words. I have a copy of signlab thats so old its on a fist full of floppys. I need an upgrade that will work on something past...

I'm bumping this thread back up
I am in the market for sheet steal in the 16 ga range, it dosen't have to be full sheets scraps or off cuts work, anyone know of any shops around with a good scrap...

No there is no direct PC link/Software that can communicate the way you want with the sim. The sims are a standalone piece of equipment, now with that being said (Geofs post reminded me) there are...

Your post leads me to believe there is a good tasting coolant
or maybe we need to make one :idea:

They are worth a drive
I have been there a few times since and its great it changes daily its a new "store" every time.
I got a fair bit for $20, more then I expected

So this isn't a drank coolant story but it happened yesterday and no that I can look back its worth a laugh.
So let me set up the scene for you I was programing on a haas VF-2 and the way they are...

To you guys with the GR series machines there is one annoying problem I have found. The reflectors for the laser safety zone if they get dirty they don't work so well and you get an open door alarm....

Now that's reality TV I could get in to, you could sell that idea to FOX.

You might be on to something there Geof I do have 120 feet

LeeWay I like the idea of maybe a CNC table

DareBee The thought has crossed my mind I don't know the best method to sell off a few

Ok a have had a pile of these things http://www.factorysupply.net/images5/Skate%20Wheel.jpg http://vistamation.com/products/conveyors/skate-wheel-conveyors/H12-AW-10-5/
Skate rollers, normally used...

wow
Looks great
I don't see any material storage, do you have any?

Im assuming this is going to be just a simple single phase 120v cnc controlled on off switch.... Maybe I shouldn't make this assumption and just sign up for one

I would be interested

I am also wondering
One thing that I have been wondering about is filters.
I have been trying to figure out what to use as filters something I can get local