i found out what was the problem i had the scale worng thats why they jog becase the scale doesnt affect that but when running the scale comes into play i had the scale at 48 inches for a 7.5 degree...
Type: Posts; User: rosevampire
i found out what was the problem i had the scale worng thats why they jog becase the scale doesnt affect that but when running the scale comes into play i had the scale at 48 inches for a 7.5 degree...
thanks for the advise i will soon be going to utech and they will teach me all this stuff but i thought why not build my own machine
so far i have done the controller and the motors though i might...
well here is the link for the motors
http://www.eminebea.com/content/html/en/motor_list/pm_motor/pdf/pm42l048.pdf
well i seemed to have found out something that the motors actually step but they do...
my problem is that i made my own conrtoller with 3 uln2003a chips wired them up and tested the two out of the three axes thats the x and y
i checked them in jog mode they work fine with nothing on...