Search:

hello

I have tool 608 defined corectly and can t load in location 8 because is locked with "Z" sign in foto.

spindle is clear and is not necesary to be locked fot reserved tool.
is locked by...

Tahnks all of you for reply.

Case solved.

Good job..

thx. for reply

that value i find easy with draw line but i need the formula to put him toghether vith variable finded with rennishaw on that point for automated gauge to find corner work offset.
...

Hallo all, i am newbie with math.
I need to find corner position with 3 point probe on part.
Position to point probe i find out with rennishaw i put him in variable but the math kill me.
Value of...

you change and reset battery alarm on okuma until now?

i think ... NO

you need battery reset disk and Johnpool ask something, you answer correct to him?

try this tool to make a image from floppy and put a image back in usb with free usb tool

you still needed?

this is the page from alarm manual
191948
You probably faulty switch LS

I already cleaned the connectors on the boards of the rack and still does not start
battery is 3.7v is ok

Hello all
i have this led on cpu rack on and the screen is like foto bellow when starting machine
machine is Okuma MC 4VA OSP5000-G

191940 and the screen is 191942
this was
happened during...

in the first photo you have to position the pallet line 41 and line 36 to the previous page find compensation for pallets to stop correctly position
I guess that's what you want to adjust their...

I think you want to see the position of the pallet because it did not meet the pallet

and for
chuck you want to change the tool orientation

right?

should go to section 2 of the parameters...

hi

to eliminate
Plex 661 alarm control unit have to put pallets on hand then put the switch on magazinne to setup station out
then press the start button next to
it came palette station setup...

I switch off to fulfill that condition and would normally be needed to charge the pallet in station setup but still have not taken that alarm index pallet and not reset the alarm that Plex 661

hello all
I have a OSP5020M MC-500H Okuma error
not have
book errors
if you can tell me how to fix it
error is:

661 AlarmB APW palettenindex zustand 'PLEX'

and diagnostic screen shows: