Search:

hello I have a problem with a Siemens control machine I have found alarms I wanted to know how to solve this problem it is the first time I have used this machine

Hello I need help this is the first time I have used this machine I wanted to know how to solve this problem alarm cn

hello it is still the hard drive sometimes there is a procedure to do to recover the system. This is m’y émail [email protected]

Hello yes the power supply alarm is a problem on the drive you can send me a photo

[QUOTE=ZOKIPOKI;2344968]hello my friend
did you solve the problem
did you find something
i have the same problem
plese help[/QUOTE

Hello Brother I hope you are doing well yes I am a...

Hello Brother I hope you are doing well yes I am a technician specializing in m32 l32 k16 A20 cmz machines if you want You can send me an e-mail I can help you

[QUOTE=gbratk;2427405]Hi,

Does anyone have this machine, I would like to buy it and I would like that someone tells me anything about it.

Thank you

Best regards[/QUOTE

Hello Brother I...

.
Hello Brother I hope you are doing well yes I am a technician specializing in m32 l32 k16 A20 cmz machines if you want You can send me an e-mail I can help you

.

Hi Brother I hope all is well yes it is necessary to make the origin of the Z axis there is a procedure to do that if you can not send me on my e-mail

Good morning Yes I changed the Z3 axis encoder completely new but the problem is still EMG.

There is no red lamp on the desk, there is just a deposit on Orange.

I have lost all the origins of the axes and the problem because we have changed the encoders and now the Z axis alarm 3 and disappear but we still have a problem on the emergency stop, nothing or...

Thank you for your message we found the problem that the encoders of the Z axis are defective we have changed the encoders and now the alarm and disappear

Hello Sir, I have a problem with the m32 meldas 635lc we just have a problem with the emergency stop Even if nothing is triggered. I urgently need it all working

Hello Sir, I have a problem with the m32 meldas 635lc we just have a problem with the emergency stop Even if nothing is triggered. I urgently need it all working

Exactly all the axes are perfectly at the origin but if right there Turret is after opening the encoder I found that the coupling Between the encoder and the motor and defective after rules that now...

hello friends I have a problem on m32 machine citizen meldas 600 an alarm on the z3 axis S01 servo alarm: pr 0025

problem is that I changed the Cable of the turret by cable X2 and I noticed that the Cable of the turret is working but when I plug it into its TI connector there are three axes which appear on the...

Hello, I'm fine, I have a Mitsubishi meldas 600 machine I have a problem with the amp always alarm y03 Amp unequipped the machine every time I restart the machine I changed the batteries always the...

Friends, I'm fine I hope you are doing well I have a problem with the machine a Mitsubishi m32 m600 at the turret level when I make the origins of the axes and the turret after I turn off the machine...

Friends, I'm fine I hope you are doing well I have a problem with the machine a Mitsubishi m32 mixed 600 at the turret level when I make the origins of the axes and the turret after I turn off the...

Plc ladder for free [email protected]

Hello I have a problem on the m32 machine on the milling motor I run the program on the milling point they trigger each time I go to repeat that the same thing I wanted to know if the motor or the...

Yeah I have the same thing on my machine CMZ tc20y fanuc In a few seconds I come across an FM44 low pressure lubricant alarm and I don't know what to do I changed the tank completely with another one...

Problem on the machine it meldas 500 on the console there is no system image you could not enter the display parameters it's just maybe the system delete or reset I change the cpu card Qx 141-1 the...

Hello give me you email and pmc ladder I will rest your password

Give me your email and pmc ladder

Give origine for axis y

Hello friend I have a20

Problem on the machine it meldas 500 on the console there is no system image you could not enter the display parameters it's just maybe the system delete or reset I change the cpu card Qx 141-1 the...

Problem on the machine it meldas 500 on the console there is no system image you could not enter the display parameters it's just maybe the system delete or reset I change the cpu card Qx 141-1 the...