Im working with a / cubic diamond csl- with polygim controls. Meldas 60 series.
After a battery failure, machine had to be reprogrammed. I can engage c axis via panel, but not through program.
...
Type: Posts; User: radboi22
Im working with a / cubic diamond csl- with polygim controls. Meldas 60 series.
After a battery failure, machine had to be reprogrammed. I can engage c axis via panel, but not through program.
...
I was able to get the spindle to turn on and off in Mach3, which is fantastic! The VFD is the ASKPOWER vfd, 12v is for a cooling fan unrelated to the board. Unfortunately B is in use as a slave. I...
So I would hook the relay up to the FWD? Thanks for the info, if anyone out there knows how to wire up the variable speed that would be awesome!
I was hoping someone could help! I've been manually turning on my spindle from the panel. I would like to have mach3 control it. Is it possible with my setup. Thanks so much guys! File for my...
I had this problem when I first started. I used gibbscam first, and I had the issue of the machine trying to run off and crashing. I figured out that in mach 3 I had to set the Machine Coords,...
I figured it out finally.. Can't believe it took me 2 weeks to find that i just have to manually input the machine position.
Thank you for your time... New to 4 axis, and solidcam, trying to set mach3 origin to be above my part, solidcam sets it inside my part at origin.
335050
Using solidcam, I set the origin to the center of my part, How to I set the starting point of my tool so it doesn't start inside the part and move to starting position.
Im using solidcam16 and mach3
Installed a 4th axis rotary, set up mach 3, I have it working properly.
My issue is with the programming the tool paths. Toolpath looks good in gibbs,
wraps the part and renders properly. After...
Bro, I looked up ASKPOWER VFD manual, and i got it! Thanks man your amazing, how do I send you money?
You are right, if there's anyway you can get those parameters, you would be saving me hours of time !!
http://www.cnczone.com/forums/attachment.php?attachmentid=330964&stc=1 Product number says HY02d22b3, but the manual for this item does not match.
Bought this VFD and spindle kit from EBAY,
Im...
I bought a 2.2kw spindle kit on ebay, The vfd came with no instructions at all. The settings are different from the other VFDS i saw on this forum. Im trying to figure out what the settings are....