I have been using Esprit Mold for several years and Esprit has been trying to get me to move to Esprit2012 or what ever the latest version is. How does Mold compare to esprit?
Type: Posts; User: Integrexman
I have been using Esprit Mold for several years and Esprit has been trying to get me to move to Esprit2012 or what ever the latest version is. How does Mold compare to esprit?
I have been using Esprit Mold for several years and Esprit has been trying to get me to move to Esprit2012 or what ever the latest version is. How does Mold compare to esprit?
Thanks Stevo
This parameter looks like it will change to radius for both turning and milling. I do not think the guys running the machine will go for this.
On mazaks I can use G122.1 to change from diameter mode to radius when milling. I would have thought the 31i control could do it.
Is there a G-code to change X values from diameter to radius?
I have had problems with CAM systems not rendering thing properly. I have had to switch from an ATI based GPU to nvidia. Unless Mazak updates there software you may need to find a different GPU....
You can download the manual at Renishaw.com
Inspection Plus - software for machining centres
I think the reason o-rings get lost or damaged is because the machine changes tools before the coolant preasure has time to bleed off. When the tool unclamps the coolant and air blast then can...
I guess it is not bad o-rings in the km63 tools then. Most of our integrex spindles that go bad were from coolant getting in the rear bearings. This was because tools lose there o-rings letting...
What series is this IV? What tooling do you have KM63 or Capto?
What do you mean by 300 PCD?
afrancoc
What control is this Matrix? What type of machine is it? If you use G122.1 X can be radial.
G00 C0.0
G17UH
G12.1
G122.1
You can search G12.1 here and find several posts.
Like bildoo said the relocation device can only be reset by a Mazak tech. You will not get the machine running again until some one from Mazak is standing at the machine.
I helped design and test it. CDW3423 made it. There is a area to discuss CNCWrite at integrexmachinist.com
Let me know if it works.
You must have Axis1 set to X and Axis2 set to A and Plunge axis set to Z. This is if you have the A axis in line with X on the right end of the table. Your work offset for Y0.0 and Z0.0 must be in...
Short answer no.
CNCWrite has a new feature, you can read about it here: http://integrexmachinist.com/forums/index.php?action=vthread&forum=19&topic=966
I know what you mean about the Safety Shield on the new Matrix control they can be a hassle and you can still crash the machine. I think Mazatrol is great It is easy to make program changes and the...
This software is only $200. http://cncwrite.com/
I have been doing a lot of on machine probing lately. Here is a link to a program I made that uses the Renishaw inspection plus macros and XYZIJK Point data from my CAM system to make a program to...
I do what you are trying to do all the time. I have a Renishaw MP700 probe and the InspectionPlus macros. I am able to ouput XYZIJK (point and vector) data from my CAM system. I made a program that I...
These videos are of a Mazak Vortex. The surface being cut and probed is spherical so I made 8 passes. It is hard to tell in the video but all 5 axis are moving all the time. Sorry about the size.
...
On the Fanuc controls I set the Data I/O parameter to output to the Memory card. It has nothing to do with the macros, Haas is probable the same. So after probing the part the report is create on the...
Why not buy the Inspection-plus macros from Renishaw $1076
You might be interested in this if you get a Renishaw Probe.
http://cncwrite.com/cmm.php
Here is the program I use to generate probing cycles for my machine.
http://cncwrite.com/cmm.php
You might look at this its free.
http://cncwrite.com/cmm.php
I just bought the Renishaw Inspection Plus Macros for our Mazak Vortex Mill and it was about $250 less to get them from Renishaw ($1076) than Mazak. I would definitely get a Probe and the macros. You...
Ya I just did a restart after the part finished.