You'll have to edit your post to get that output.. Make a backup copy of it before you do any changes. I don't have the post your using but this is a section of a lathe post I did have.
The...
Type: Posts; User: thermgood
You'll have to edit your post to get that output.. Make a backup copy of it before you do any changes. I don't have the post your using but this is a section of a lathe post I did have.
The...
I had a similar problem with our old Thermwood router. What I found...
In the mastercam help wile there is a sample of a 3 axis post, and it shows how to invert the axis. I assume that you are...
For anyone thats interested, I found my answer in the Mastercam help file. There is a post in there that is well commented, and is set up to allow axis flipping. Basically it is to multiply the axis...
I'm modifing a 5x post to work with an old machine. I need to reverse some of the axis movements. I see there are places in the post where it says enter your mapping scheme here.. Can anyone explain...
First of all I'm not an expert at this, I've modified a couple of posts. I would check a couple of things. I assume the check box in mastercam that you are refering to is under misc values. If they...
It's an old machine, the way it's setup is without any offsets. Machine 0. It doesn't have any offset tables. It could be changed to run in the normal direction, but the owner doesn't want to do...
Any suggestions on how this could be accomplished? Maybe there is something I missed in mastercam? How would you do this. Does everyone program 5 axis parts with wcs set to top?
Also, I see...
Hi, I am trying to modify a generic fanuc 5x post to work for a thermwood model 70 with 9100 controller. I need to change the direction of some of the axis, ie. z+ needs to be z- etc. My first...