Hi
So, five years later, the same problem and now I found I had not posted the final solution...
Deleted all parameters because I am just stupid enough to try holding random buttons while...
Type: Posts; User: 4lo
Hi
So, five years later, the same problem and now I found I had not posted the final solution...
Deleted all parameters because I am just stupid enough to try holding random buttons while...
Hi!
DMG Gildemeister CTX410 V1
I used to get an alarm something like
205 RIGID MODE DI SIGNAL OFF
but it turned out just to be a code format error,
no parameters needed changing.
A...
Try removing R0 from line 10
Or try
10 CP IPA+360 DR-
Sent from my HTC One using Tapatalk
Hi.
NX has a lot of most common posts preinstalled that do not show by default.
Look in the NX folder/resources/installed machines/post
(something like that)
Sent from my HTC One using Tapatalk
Internal and external threads have different depths at the same pitch which might not matter much, but rake/clearance angles make a difference.
Check the tool catalog or ask your dealer if a given...
Hi,
The toolholder should fit snug in the taper, less contact surface could lead to vibrations, poor tool life and surface quality.
There still should be a gap between the collar and spindle, it...
Great news! Good luck!
Sent from my HTC One using Tapatalk
If the encoder has the same part number I would assume the pulse counts and voltages are same so parameters should not need changing. If it is in place correctly... there have to be be specifications...
replaced it with a like model. Straight swap.
Are the encoder specs exactly the same? If the ranges/output signals vary, then the feedback will not match the commanded movement and the error will...
Don't worry about it too much, I think. If you can get oil with similar attributes the addon is not hard to do and won't make a difference especially running the machine far below its capacity.
...
I have TNC370 parameters for Bridgeport Torq Cut 2G, but that would probably cause some trouble rather than help...
Sent from my HTC One using Tapatalk
Hi,
I have a BP Torq Cut 2g, which looks similar at least.
If the air leak does not seem like anything is loose or broken, then it could be spindle cooling. Follow the leaky sounds.
I have had...
Language is ok, it's English, just a basic parameter 3102 found easily in manuals. No issue there.
The 487 and 490 alarms are undisclosed
Sent from my HTC One using Tapatalk
The door lock and release seems to be working as the safety test can be completed, but as you said, it's undocumented, so there could be sth else.
The alarm in French appeared before I restored the...
OK, so I got my factory parameters in at last!
Thanks for assuring me that I shouldn't look for others.
I guess you sometimes just need to have beer, sleep on it and just try again until it works....
I did it on the PMC I/O screen, MCARD - READ - specified the file name with leading @.
It started reading the right file since I could see line numbers scrolling present in the PMC-SB.PRM file. And...
I held down two rightmost soft keys at power-on and then tried restoring from the boot menu.
When that did not work, I tried reading in PMC params with the machine running in EDIT mode. It started...
Hello!
I hope there's someone out there with a working Gildemeister CTX 410 V1 running on Fanuc 21i-TB.
I bought a used machine and managed to erase some important data, including PMC params....
Hello,
I just ran in to the same issue, when for some reason the x-axis was able to move way up but did not respond when I tried to jog it the other way.
I also had the 410 alarm before.
How...
Hello bcslc,
I have the same machine, probably late with the reply, but here goes:
Service manual: https://www.dropbox.com/s/lv9ww7q4arti6ja/tnc370service%20manual.pdf?dl=0
Operators manual:...
Hello
I have a 2000 Bridgeport Torq Cut 2g with Heidenhain TNC 370 which started dropping tools at tool change after buffer battery replacement.
I wasn't using the machine for a few days and then...
About the oil capacity, mine took about 5L because I dismantled, brought it to the ground and let it run dry upside down. I needed to change the lower transmission bearings, so I had to strip it down...
Hi
I have a TC-2G, which seems to have the same gearbox.
bptparts.com has the parts and gears you might need for it, indeed hardinge does not support it any longer. They charge a bit too much for...