What are you trying to do or what is the problem ?
Type: Posts; User: vincent.pomerleau
What are you trying to do or what is the problem ?
Hi
For the first error remove de space from
METRIC_O UT) -----> METRIC_OUT)
For second error, my post is build to handle angle head for horizontal work, I have the working_plane...
Yes it helped a lot ! Have you did the same thing for the outputs to turn on the vfd ?
Can you provide me more details on how to wire the transistor and the resistor to the outputs? And the number of the transistor, I not really versed in electronics! Thanks
I'm also looking for the .bin file for EC500/NVEC400, someone have them?
Hello abc123456789!
Did you receive a cd with this control?
I'm looking for a .bin file to reset the firmware on mine
Thanks
I accidentally flash my firmware with the wrong .bin file in mach3, does someone have the right one for this controller, I have the nvec400 but in the attached picture, I saw that ec500 should work,...
Never had this issue with allowance, I put it in positive and it leave material (OD & ID)... for the rough cycle, you can set the final cut amount to zero and no cleanup will be generated
I flip my center for my right angle head
Here's my how I do it
:SECTION=CALC_CENTER(DVAL,DEFAULTVAL,GC,GG,G_GROUP,MACH,PREV,P_REG,REGISTER,AIC)
:C: IF ATTROVERRIDE=YES THEN DVAL=ATTRDVALUE...
Copy this to you .lib file, it should work, you may have to reverse your arc direction to make this works,register are x=24 y=25 z=26
...
at the start of .src file change these
LEADING=FALSE
INT_LEADING=FALSE
Replace :( by : (
Try replacing these sections in .src file
:SECTION=LINE_LEADIN_MOVE_MILL
:T:C<%:(COMP-40)><G:1><X!><Y!><Z><F><EOL>...
Try thes syntaxes
<"#3.3T":STOCK_LENGTH>
<"#3.3T":STOCK_WIDTH>
<"#3.3T":STOCK_HEIGHT>
<"#3.4":TOOL_DIAMETER>
For tool description, I never try it
You can try add this to your mill.lib file...
You could use the CNC compensation in NC tab to do this, I think it's less a risk than programming a pocket without any visual simulation, unless your machine cycle work exactly as the camworks...
You could use the CNC compensation in NC tab to do this, I think it's less a risk than programming a pocket without any visual simulation, unless your machine cycle work exactly as the camworks...
It's possible to implement them as post operation but you will not have simulation of them !! I don't see any advantage of using conversational programming within a CAM system...
I my example I only made a Boss feature with avoids(no islands) , It make my rectangular part in a single pass (no stepover) and I use the tool that I want! Hope this help!
the .lib file I expected was FANCMD.lib , not MILL.lib
Do you make your changes in the MILL.lib file?
If so, do them in the FANCMD.lib and recompile, it should work!
Its better not modifying the...
try changing the extensions to .txt
Attach your .src and .lib file and I will take a look
In your calc_start_of_tape section you will find
:C: CALL(START_OF_TAPE)
put your command right after
:C: CALL(START_OF_TAPE)
:C: GETTOOLS(2,OUTPUT_TOOL_LIST)
I assume your N100 line is...
Use avoid area to do this using sketch , it work well!
377082
377084
377086
There's someone here who have the WinPlus software to edit PLC programs and the WinPlus libraries to create application to communicate with the CNC
:( = : ( WITHOUT SPACE
Sorry I checked in the documentation and there isn't TOOL_RADIUS variable
try this
:T:<N><T!><AXIS_PLANE><S!> DR-<#:(TOOL_DIAMETER/2)><EOL>
TRY
:T:<N><T!><AXIS_PLANE><S!> DR-<#:TOOL_RADIUS><EOL>
:SECTION=OUTPUT_TOOL_LIST
:T: <SEMICOLON><LEFT_PAR>T<"%2LNT":TOOL>=<TOOL_COMMENT> STICKOUT <"#1.3":TOOL_PROTRUSION><RIGHT_PAR><EOL>
According to my documentation, with a 31i control you need the FWLIB30i.DLL, if it's a FS31i, you need the FWLIBNCG.DLL.
Yes! there are other .dll than the fwlib32.dll, it depend on the control you're using